[1]
|
Jiang Huilin, An Yan, Zhang Yalin, et al. Analysis of the status, development trend and key technologies of space laser communication[J]. Journal of Spacecraft TT C Technology, 2015, 34(3):207-217. (in Chinese)姜会林, 安岩, 张雅琳, 等. 空间激光通信现状、发展趋势及关键技术分析[J]. 飞行器测控学报, 2015, 34(3):207-217. |
[2]
|
Jiang Huilin, Jiang Lun, Song Yansong, et al. Research of optical and APT technology in one-point to multi-point simultaneous space laser communication system[J]. Chinese Journal of Lasers, 2015, 42(4):150-158. (in Chinese)姜会林, 江伦, 宋延嵩, 等. 一点对多点同时空间激光通信光学跟瞄技术研究[J]. 中国激光, 2015, 42(4):150-158. |
[3]
|
Wang Zhongsu, Zhai Yan, Mei Gui, et al. Design of flexible support structure of reflector in space remote sensor[J]. Optics and Precision Engineering, 2010, 18(8):1833-1841. (in Chinese)王忠素, 翟岩, 梅贵, 等. 空间光学遥感器反射镜柔性支撑的设计[J]. 光学精密工程, 2010, 18(8):1833-1841. |
[4]
|
Bao Qihong, Sha Wei, Chen Changzheng, et al. Characteristics of rear support in centre for space SiC mirror[J]. Acta Photonica Sinica, 2017, 46(2):0222003. (in Chinese)包奇红, 沙巍, 陈长征, 等. 空间SiC反射镜背部中心支撑特性[J]. 光子学报, 2017, 46(2):0222003. |
[5]
|
Li Haixing, Ding Yalin, Zhang Hongwen. Support system study of rectangular mirror[J]. Acta Optica Sinica, 2015, 35(5):0523002. (in Chinese)李海星, 丁亚林, 张洪文. 矩形反射镜结构支撑技术研究[J]. 光学学报, 2015, 35(5):0523002. |
[6]
|
Xu Xinxing, Gao Yunguo, Yang Hongbo, et al. Large-diameter fast steering mirror on rigid support technology for dynamic platform[J]. Optics and Precision Engineering, 2014, 22(1):117-124. (in Chinese)徐新行, 高云国, 杨洪波, 等. 车载大口径刚性支撑式快速反射镜[J]. 光学精密工程, 2014, 22(1):117-124. |
[7]
|
Zhou Ziyun, Gao Yunguo, Shao Shuai, et al. Design of fast steering mirror using flexible hinge[J]. Optics and Precision Engineering, 2014, 22(6):1547-1554. (in Chinese)周子云, 高云国, 邵帅, 等. 采用柔性铰链的快速反射镜设计[J]. 光学精密工程, 2014, 22(6):1547-1554. |
[8]
|
Qi Guang, Wang Shuxin, Li Jinglin. Design of high volume fraction SiC/Al composite mirror in space remote sensor[J]. Chinese Optics, 2015, 8(1):99-106. (in Chinese)齐光, 王书新, 李景林. 空间遥感器高体份SiC/Al复合材料反射镜组件设计[J]. 中国光学, 2015, 8(1):99-106. |
[9]
|
Dong Deyi, Li Zhilai, Li Ruigang, et al. Simulation and experiment of influence of adhesive curing on reflective mirror surface[J]. Optics and Precision Engineering, 2014, 22(10):2698-2707. (in Chinese)董得义, 李志来, 李锐钢, 等. 胶层固化对反射镜面形影响的仿真与试验[J]. 光学精密工程, 2014, 22(10):2698-2707. |
[10]
|
Jia Shuqiang, Huang Wei, Pang Wubin. Influence of adhesive thickness on surface deformation of mirror supported by three-point mount[J]. Optics and Precision Engineering, 2015, 23(7):2005-2012. (in Chinese)贾树强, 黄玮, 庞武斌. 胶层厚度对三点支撑反射镜面形的影响[J]. 光学精密工程, 2015, 23(7):2005-2012. |
[11]
|
Yoder Jr P R. Opto-mechanical Systems Design[M]. Hoboken:CRC Press, 2005:396-398. |