红外用机械制冷机驱动电路的共模干扰机理

张家昆; 杨宝玉; 孙德新

doi:10.3788/IRLA202049.0104001

留言板

尊敬的读者、作者、审稿人, 关于本刊的投稿、审稿、编辑和出版的任何问题, 您可以本页添加留言。我们将尽快给您答复。谢谢您的支持!

姓名
邮箱
手机号码
标题
留言内容
验证码

红外用机械制冷机驱动电路的共模干扰机理

张家昆, 杨宝玉, 孙德新

文章导航 > 红外与激光工程 > 2020 > 49(1): 0104001-0104001(9)

张家昆, 杨宝玉, 孙德新. 红外用机械制冷机驱动电路的共模干扰机理[J]. 红外与激光工程, 2020, 49(1): 0104001-0104001(9). doi: 10.3788/IRLA202049.0104001

引用本文:

张家昆, 杨宝玉, 孙德新. 红外用机械制冷机驱动电路的共模干扰机理[J]. 红外与激光工程, 2020, 49(1): 0104001-0104001(9). doi: 10.3788/IRLA202049.0104001

Zhang Jiakun, Yang Baoyu, Sun Dexin. Common-mode interference mechanism of the driving circuit of cryocooler used on infrared system[J]. Infrared and Laser Engineering, 2020, 49(1): 0104001-0104001(9). doi: 10.3788/IRLA202049.0104001

Citation:

Zhang Jiakun, Yang Baoyu, Sun Dexin. Common-mode interference mechanism of the driving circuit of cryocooler used on infrared system[J]. Infrared and Laser Engineering, 2020, 49(1): 0104001-0104001(9). doi: 10.3788/IRLA202049.0104001

红外用机械制冷机驱动电路的共模干扰机理

doi: 10.3788/IRLA202049.0104001

1. 中国科学院上海技术物理研究所, 上海 200083;
2. 中国科学院大学, 北京 100049

基金项目:

国家重点研发计划（2016YFB0500400）；国家自然科学基金（51806231）

详细信息

作者简介:
张家昆(1993-),男,博士生,主要从事系统级电磁兼容方面的研究。Email:zhangjiakun2008@163.com

中图分类号: TN972

Common-mode interference mechanism of the driving circuit of cryocooler used on infrared system

1. Shanghai Institute of Technical Physics, Chinese Academy of Sciences, Shanghai 200083, China;
2. University of Chinese Academy of Sciences, Beijing 100049, China

摘要: 机械制冷机是提供红外载荷工作所需低温环境的主要设备，其驱动系统的传导干扰是影响红外载荷精度的重要因素。传导干扰中的共模干扰具有较高的分析难度，为研究其机理，以某红外用机械制冷机及驱动系统为研究对象，使用一种新型多物理域联合仿真的方法对共模干扰机理进行定量分析，并通过实验测试验证了仿真模型的准确性。最终对其干扰路径及干扰源特性进行了分析，并总结出共模干扰机理。结果表明：测试频段内制冷机的寄生参数是影响共模干扰通路的最主要因素，但随频率增加，输入输出电缆的寄生参数对干扰通路的影响逐渐增大，同时，干扰机理显示：系统产生的共模干扰最可能导致CE102标准在频段500 kHz~1 MHz干扰超限。
- 红外载荷 /
- 共模干扰 /
- 机械制冷机驱动系统 /
- 联合仿真 /
- 干扰机理
Abstract: Cryocooler is an important equipment to provide low temperature working environment for infrared device. However, its driving system's conducted interference severely affects the precision of the infrared loading. It's not easy to analyze the common-mode part included in conducted interference. To study the common-mode interference mechanism, based on an existing infrared system project's cryocooler and its driving system, the mechanism was quantitatively analyzd using a new multi-physics co-simulation method and the model's accuracy was verified by specific experiment measurement. Finally, the characteristic of disturbance pathway and source were analyzed and the mechanism of the common-mode interference was concluded. Results show that, the parasitic parameter of the cryocooler is the most important factor of transmission path within the range of test frequency. However, with frequency increase, the effect of cable's parasitic parameter is increasing and can't be ignored. The interference mechanism concludes that the common mode interference produced by system may induce the overrun of the CE102 standard from 500 kHz to 1 MHz.
- infrared loading /
- common-mode interference /
- cryocooler driving system /
- co-simulation /
- interference mechanism

[1]	Paul C R, Hardin K B. Diagnosis and reduction of conducted noise emissions[J]. IEEE Transactions on Electromagnetic Compatibility, 1988, 30(4):553-560.
[2]	Zhang H, Wang S, Puukko J. Common mode EMI noise modeling and prediction for a three-phase, three-level, grid tied photovoltaic inverter[C]//Asia-Pacific International Symposium on Electromagnetic Compatibility, IEEE, 2016:1188-1194.
[3]	Zhai L, Lin L, Song C, et al. Mitigation conducted-EMI emission strategy based on distributed parameters of power inverter system in electric vehicle[C]//Power Electronics Conference, IEEE, 2017.
[4]	Sunitha P M, Banakara B, Reddy S. Modeling, simulation and analysis of common mode voltage, bearing voltage and bearing current in PWM multilevel inverter fed induction motor with long cable[C]//IEEE International Conference on Recent Trends in Electronics, IEEE, 2018.
[5]	Toure B, Schanen J L, Gerbaud L, et al. EMC modeling of drives for aircraft applications:modeling process, EMI filter optimization, and technological choice[J]. IEEE Transactions on Power Electronics, 2013, 28(3):1145-1156.
[6]	Shinde S, Masuda K, Shen G, et al. Radiated EMI estimation from DC-DC converters with attached cables based on terminal equivalent circuit modeling[J]. IEEE Transactions on Electromagnetic Compatibility, 2017, 99:1-8.
[7]	Gwon O H, Jeon J W, Ahn J, et al. Component characteristics of motor drive system in EV/HEV and its noise spectrum analysis[C]//International Conference on Electrical Machines & Systems, IEEE, 2014.

[1]	诸经豪, 杨宝玉, 张家昆, 吴亦农. 红外用制冷机高阶驱动下的优化驱动方法设计 . 红外与激光工程, 2023, 52(2): 20220369-1-20220369-10. doi: 10.3788/IRLA20220369
[2]	赵非玉, 王亮, 过凯, 张静元, 潘博臣, 郭树超. 点面复合红外诱饵空中动态散布特性仿真及使用研究 . 红外与激光工程, 2023, 52(4): 20220476-1-20220476-9. doi: 10.3788/IRLA20220476
[3]	李传良, 李韬锐, 王超哲. 诱饵参数对面源红外诱饵干扰效能的影响 . 红外与激光工程, 2021, 50(8): 20210006-1-20210006-8. doi: 10.3788/IRLA20210006
[4]	李传良, 童奇, 王超哲, 许丹丹, 杨安元, 黄鹤松, 尚海龙, 李韬锐. 目标机飞行参数对面源红外诱饵干扰效能影响 . 红外与激光工程, 2020, 49(S1): 20200095-20200095. doi: 10.3788/IRLA20200095
[5]	胡以华, 徐世龙. 对集群光电成像传感器的多源协同相干激光干扰机理研究 . 红外与激光工程, 2019, 48(4): 406010-0406010(6). doi: 10.3788/IRLA201948.0406010
[6]	王兆利, 梁惊涛, 赵密广, 陈厚磊, 王娟, 卫铃佼. 机械制冷机冷却的透射式光学系统支撑结构 . 红外与激光工程, 2019, 48(2): 218006-0218006(11). doi: 10.3788/IRLA201948.0218006
[7]	韩宏伟, 张晓晖. 烟幕对红外热成像干扰效果评价 . 红外与激光工程, 2018, 47(12): 1204004-1204004(5). doi: 10.3788/IRLA201847.1204004
[8]	李慎波, 李韬锐, 童中翔, 黄鹤松. 导弹战术参数对面源红外诱饵干扰效能影响 . 红外与激光工程, 2018, 47(7): 704004-0704004(10). doi: 10.3788/IRLA201847.0704004
[9]	李韬锐, 童中翔, 李慎波, 黄鹤松. 面源红外诱饵干扰效能评估系统仿真研究 . 红外与激光工程, 2018, 47(3): 304001-0304001(9). doi: 10.3788/IRLA201847.0304001
[10]	李韬锐, 童中翔, 黄鹤松, 王超哲, 李慎波. 空战对抗中面源红外诱饵干扰效能仿真 . 红外与激光工程, 2017, 46(9): 904002-0904002(8). doi: 10.3788/IRLA201746.0904002
[11]	钮赛赛, 印剑飞, 曹卫卫, 杨尧, 王晓柱, 宋敏敏. 红外成像系统激光干扰耀斑仿真建模 . 红外与激光工程, 2017, 46(S1): 13-17.
[12]	常帅, 高秀伟, 佟首峰, 宋延嵩, 董岩. 红外辐射式干扰弹能量测量装置研究 . 红外与激光工程, 2016, 45(1): 117002-0117002(5). doi: 10.3788/IRLA201645.0117002
[13]	唐聪, 殷松峰, 凌永顺, 王一程, 杨星, 徐凯. 基于红外照射仿真的快速搜索相关跟踪干扰点研究 . 红外与激光工程, 2016, 45(1): 104003-0104003(6). doi: 10.3788/IRLA201645.0104003
[14]	柴国贝, 张建奇, 刘德连, 黄曦, 张冬阳. 海洋环境对红外诱饵弹干扰特性建模及仿真 . 红外与激光工程, 2016, 45(3): 304009-0304009(8). doi: 10.3788/IRLA201645.0304009
[15]	王炜强, 贾晓洪, 韩宇萌, 张晓阳, 付奎生. 定向干扰激光的红外成像建模与仿真 . 红外与激光工程, 2016, 45(6): 606005-0606005(6). doi: 10.3788/IRLA201645.0606005
[16]	贾林通, 童中翔, 王超哲, 马榜, 王彪. 机载面源红外诱饵及干扰效能研究 . 红外与激光工程, 2016, 45(9): 904005-0904005(12). doi: 10.3788/IRLA201645.0904005
[17]	童奇, 王超哲, 童中翔, 李建勋, 贾林通, 柴世杰. 红外干扰机对四元正交探测器的干扰效能 . 红外与激光工程, 2014, 43(8): 2496-2504.
[18]	殷瑞光, 张文攀, 刘艳芳, 王敏, 梁巍巍. 基于实测数据的激光高重频干扰效果数学仿真 . 红外与激光工程, 2013, 42(7): 1710-1715.
[19]	邹前进, 陈前荣, 黄振宇, 李华, 黄成功, 亓凤杰, 王彦斌. 激光干扰CCD规律圆形条纹作用机理分析 . 红外与激光工程, 2013, 42(8): 2017-2021.
[20]	钱方, 郭劲, 邵俊峰, 王挺峰. 调幅式红外导引头干扰机理 . 红外与激光工程, 2013, 42(6): 1432-1436.

点击查看大图

计量

文章访问数: 705
HTML全文浏览量: 93
PDF下载量: 57
被引次数: 0

红外用机械制冷机驱动电路的共模干扰机理

doi: 10.3788/IRLA202049.0104001

1. 中国科学院上海技术物理研究所, 上海 200083;

2. 中国科学院大学, 北京 100049

作者简介:
张家昆(1993-),男,博士生,主要从事系统级电磁兼容方面的研究。Email:zhangjiakun2008@163.com

收稿日期: 2019-10-11
修回日期: 2019-11-21
刊出日期: 2020-01-28

基金项目:

国家重点研发计划（2016YFB0500400）；国家自然科学基金（51806231）

中图分类号: TN972

关键词:

摘要: 机械制冷机是提供红外载荷工作所需低温环境的主要设备，其驱动系统的传导干扰是影响红外载荷精度的重要因素。传导干扰中的共模干扰具有较高的分析难度，为研究其机理，以某红外用机械制冷机及驱动系统为研究对象，使用一种新型多物理域联合仿真的方法对共模干扰机理进行定量分析，并通过实验测试验证了仿真模型的准确性。最终对其干扰路径及干扰源特性进行了分析，并总结出共模干扰机理。结果表明：测试频段内制冷机的寄生参数是影响共模干扰通路的最主要因素，但随频率增加，输入输出电缆的寄生参数对干扰通路的影响逐渐增大，同时，干扰机理显示：系统产生的共模干扰最可能导致CE102标准在频段500 kHz~1 MHz干扰超限。

English Abstract

Common-mode interference mechanism of the driving circuit of cryocooler used on infrared system

1. Shanghai Institute of Technical Physics, Chinese Academy of Sciences, Shanghai 200083, China;

2. University of Chinese Academy of Sciences, Beijing 100049, China

Received Date: 2019-10-11
Rev Recd Date: 2019-11-21
Publish Date: 2020-01-28

Keywords:

Abstract: Cryocooler is an important equipment to provide low temperature working environment for infrared device. However, its driving system's conducted interference severely affects the precision of the infrared loading. It's not easy to analyze the common-mode part included in conducted interference. To study the common-mode interference mechanism, based on an existing infrared system project's cryocooler and its driving system, the mechanism was quantitatively analyzd using a new multi-physics co-simulation method and the model's accuracy was verified by specific experiment measurement. Finally, the characteristic of disturbance pathway and source were analyzed and the mechanism of the common-mode interference was concluded. Results show that, the parasitic parameter of the cryocooler is the most important factor of transmission path within the range of test frequency. However, with frequency increase, the effect of cable's parasitic parameter is increasing and can't be ignored. The interference mechanism concludes that the common mode interference produced by system may induce the overrun of the CE102 standard from 500 kHz to 1 MHz.