[1] Chen Bing, Guo Bing, Zhao Qingliang, et al. Ultra precision grinding of hot pressed zinc sulfide [J]. Optical Precision Engineering, 2014, 22(8): 2109-2116. (in Chinese) doi:  10.3788/OPE.20142208.2109
[2] Zhou Guanguan, Yu Haiou, Zheng Lihe, et al. high temperature properties of mid infrared optical materials [J]. Infrared and Laser Engineering, 2012, 41(3): 554-558. (in Chinese)
[3] Liu Huasong, Jiang Chenghui, Li Shida, et al. Effect of vacuum heat treatment on optical and microstructure properties of ZnS thin films [J]. Optical Precision Engineering, 2017, 25(8): 2038-2045. (in Chinese) doi:  10.3788/OPE.20172508.2038
[4] Li gailing, Sun Kaiyuan, Feng Renyu, et al. Study on subsurface damage mechanism and common measurement methods [J]. Coal Mining, 2008(12): 99-100. (in Chinese)
[5] Dai Zihua, Zhu Yongwei, Li Jun, et al. Study on measurement method of subsurface damage layer depth of K9 glass ground by consolidated abrasive [J]. Diamond and Abrasive Tool Engineering, 2014(5): 6-12. (in Chinese)
[6] Li Qingpeng, Bai Qian, Zhang Bi. Detection of subsurface microcracks in monocrystalline silicon wafer after grinding by polarized laser scattering [J]. Diamond and Abrasive Tool Engineering, 2020, 40(4): 87-92. (in Chinese)
[7] Liu Jian, Ma Zhanlong, Wang Junlin. Research status of subsurface damage detection technology for optical components [J]. Laser & Optoelectronics Progress, 2011, 48(8): 15-21. (in Chinese)
[8] Wang Ningchang, Jiang Feng, Huang Hui, et al. Research status and development trend of subsurface damage detection of brittle materials [J]. Journal of Mechanical Engineering, 2017, 53(9): 081204. (in Chinese) doi:  10.3901/JME.2017.09.170
[9] Tan Yuanqiang, Yang Dongmin, Li Cai, et al. Discrete element simulation of single crystal silicon processing crack [J]. China Mechanical Engineering, 2008, 19(21): 2545-2548,2581. (in Chinese)
[10] Tan Yuanqiang, Yang Dongmin, Sheng Yong. Study of polycrystalline Al2O3 machining cracks using discrete element method [J]. International Journal of Machine Tool& Manufacture, 2008, 48(9): 975-982.
[11] Wang Jianbin, Ma Rui, Jiang Benchi, et al. Prediction of subsurface damage of single crystal sapphire by consolidation abrasive grinding [J]. Surface Technology, 2020, 49(9): 345-351. (in Chinese)
[12] Zhu Yongwei, Li Xinlu, Wang Zhankui, et al. Subsurface damage prediction in consolidated abrasive grinding of optical hard and brittle materials [J]. Optical Precision, 2017, 25(2): 367-374. (in Chinese) doi:  10.3788/OPE.20172502.0367
[13] Dop A, Pac B. A bonded-particle model for rock [J]. International Journal of Rock Mechanics and Mining Sciences, 2004, 41(8): 1329-1364.
[14] Chen Bing, Jiao Haowen, Luo Liang, et al. Grinding removal mechanism of ZnS by multispectral CVD [J]. Aerospace Materials Technology, 2019, 49(4): 90-94. (in Chinese)
[15] Zheng Xiulin, Liu Zhengtang. Comparison of different preparation methods and properties of ZnS [J]. Materials Guide, 1995(4): 35-38. (in Chinese)
[16] Wang Zhankui, Zhu Yongwei, Li Xinlu, et al. Average cutting depth and subsurface damage behavior of magnesia alumina spinel by consolidated abrasive grinding [J]. Acta Silicate Sinica, 2017, 45(3): 402-409. (in Chinese)
[17] Yin Jingfei, Bai Qian, Zhang Bi. Methods for detection of subsurface damage: A review [J]. Chinese Journal of Mechanical Engineering, 2018, 31(1): 1-14. doi:  10.1186/s10033-018-0219-4