[1] 王巍. 新型惯性技术发展及在宇航领域的应用[J]. 红外与激光工程, 2016, 45(03): 11-16.

Wang Wei. Development of new inertial technology and its application in aerospace field [J]. Infrared and Laser Engineering, 2016, 45(3): 0301001. (in Chinese)
[2] 王巍, 邢朝洋, 冯文帅. 自主导航技术发展现状与趋势[J]. 航空学报, 2021, 42(11): 18-36.

Wang Wei, Xing Chaoyang, Feng Wenshuai. Research of autonomous navigation technology [J]. Acta Aeronautica et Astronautica Sinica, 2021, 42(11): 18-36. (in Chinese)
[3] 刘颖, 赵小东, 李言, 等. 采用冗余设计的光纤陀螺组合支架的优化及分析[J]. 红外与激光工程, 2012, 41(06): 1556-1560. doi:  10.3969/j.issn.1007-2276.2012.06.029

Liu Ying, Zhao Xiaodong, Li Yan, et al. Optimize and analysis of fiber optic gyroscope combination bracket based on redundancy design [J]. Infrared and Laser Engineering, 2012, 41(6): 1556-1560. (in Chinese) doi:  10.3969/j.issn.1007-2276.2012.06.029
[4] 朱挺, 王丽芬, 王永让, 等. 双轴旋转惯导载体角运动隔离调制方法研究[J]. 仪器仪表学报, 2020, 41(12): 66-75.

Zhu Ting, Wang Lifen, Wang Yongrang, et al. Carrier angular motion isolation and modulation method of dual-axis rotation inertial navigation system [J]. Chinese Journal of Scientific Instrument, 2020, 41(12): 66-75. (in Chinese)
[5] 任元, 王丽芬, 苗继松, 等. 捷联惯导系统偏轴-旋转复合调制技术[M]. 北京: 国防工业出版社, 2020.

Ren Yuan, Wang Lifen, Miao Jisong, et al. Non-coaxial Rotation Compound Modulation Technology for Strapdown Inertial Navigation System[M]. Beijing: National Defense Industry Press, 2020. (in Chinese)
[6]

Pittelkau M E. Calibration and attitude determination with redundant inertial measurement units [J]. Journal of Guidance Control & Dynamics, 2012, 28(4): 743-752.
[7] 赵新强, 晁代宏, 宋来亮. 基于单轴转台的斜置RSINS标定方法[J]. 导航与控制, 2014, 13(3): 19-25, 55. doi:  10.3969/j.issn.1674-5558.2014.03.004

Zhao Xinqiang, Chao Daihong, Song Lailiang. A method to calibrate skewed RSINS by single-axis turntable [J]. Navigation and Control, 2014, 13(3): 19-25, 55. (in Chinese) doi:  10.3969/j.issn.1674-5558.2014.03.004
[8] 魏莉莉, 黄军, 傅长松, 等. 带斜置元件的光纤陀螺捷联惯组标定方法[J]. 中国惯性技术学报, 2015, 23(01): 14-19.

Wei Lili, Huang Jun, Fu Changsong, et al. Calibration method of FOG strapdown IMU with asked sensor axis [J]. Journal of Chinese Inertial Technology, 2015, 23(1): 14-19. (in Chinese)
[9] 梁海波, 梁婕, 孟恭, 等. 冗余陀螺测量单元的实验室标定方法设计[J]. 航天控制, 2016, 34(1): 9-14, 19. doi:  10.3969/j.issn.1006-3242.2016.01.002

Liang Haibo, Liang Jie, Meng Gong, et al. Method of laboratory calibration for redundant gyroscope unit [J]. Aerospace Control, 2016, 34(1): 9-14, 19. (in Chinese) doi:  10.3969/j.issn.1006-3242.2016.01.002
[10] 程建华, 刘明, 王振民. 基于陀螺仪输出误差观测的冗余INS标定方法[J]. 中国惯性技术学报, 2019, 27(3): 301-306, 396.

Cheng Jianhua, Liu Ming, Wang Zhenmin. Calibration method of redundant INS based on output error observation of gyroscope [J]. Journal of Chinese Inertial Technology, 2019, 27(3): 301-306,396. (in Chinese)
[11] 李杨, 郭磊, 葛靖宇, 等. 一种基于输出误差观测的冗余MEMS-IMU标定技术研究[J]. 导航定位与授时, 2020, 7(01): 133-138.

Li Yang, Guo Lei, Ge Jingyu, et al. Research on redundant MEMS-IMU calibration technology based on output error observation [J]. Navigation Positioning & Timing, 2020, 7(1): 133-138. (in Chinese)
[12]

Gheorghe M V, Bodea M C, Dobrescu L. Calibration of skew redundant sensor configurations in the presence of field alignment errors [J]. IEEE Transactions on Instrumentation and Measurement, 2019, 69(4): 1794-1804.
[13] 王坚, 梁建, 韩厚增. 低成本IMU的多位置旋转现场标定方法[J]. 中国惯性技术学报, 2017, 25(03): 294-298.

Wang Jian, Liang Jian, Han Houzeng. Method for low-cost IMU in-field calibration through multi-position rotation [J]. Journal of Chinese Inertial Technology, 2017, 25(3): 294-298. (in Chinese)
[14] 王岁儿, 杨功流, 王丽芬, 等. 一种IMU全零偏快速标定方法[J]. 中国惯性技术学报, 2020, 28(3): 316-322.

Wang Suier, Yang Gongliu, Wang Lifen, et al. A fast calibration method for the all biases of IMU [J]. Journal of Chinese Inertial Technology, 2020, 28(3): 316-322. (in Chinese)
[15] 杨管金子, 李建辰, 黄海, 等. 基于遗传算法的加速度计免转台标定方法[J]. 中国惯性技术学报, 2017, 25(1): 119-123.

Yang Guanjingzi, Li Jianchen, Huang Hai, et al. Non-turntable calibration method for three-accelerometer based on genetic algorithm [J]. Journal of Chinese Inertial Technology, 2017, 25(1): 119-123. (in Chinese)
[16] 高爽, 张若愚. 基于自适应遗传算法的MEMS加速度计快速标定方法[J]. 北京航空航天大学学报, 2019, 45(10): 1982-1989.

Gao Shuang, Zhang Ruoyu. Rapid calibration method of MEMS accelerometer based on adaptive GA [J]. Journal of Beijing University of Aeronautics and Astronautics, 2019, 45(10): 1982-1989. (in Chinese)
[17] 戴洪德, 郑伟伟, 郑百东, 等. 基于IFOA的MEMS加速度计无转台标定[J]. 北京航空航天大学学报, 2021, 47(10): 1959-1968.

Dai Hongde, Zheng Weiwei, Zheng Baidong, et al. Calibration of MEMS accelerometer without turntable based on IFOA [J]. Journal of Beijing University of Aeronautics and Astronautics, 2021, 47(10): 1959-1968. (in Chinese)
[18] 胡梦纯, 徐挺, 黄云柯, 等. 冗余结构光纤陀螺捷联惯组标定优化方法研究[J]. 上海航天, 2016, 33(S1): 134-139.

Hu Mengchun, Xu Ting, Huang Yunke, et al. Optimization method for calibration of redundant structure FOG IMU [J]. Aerospace Shanghai, 2016, 33(S1): 134-139. (in Chinese)
[19]

Silva F O, Hemerly E M, Leite-Filho W C. Error analysis of analytical coarse alignment formulation for stationary SINS [J]. IEEE Transactions on Aerospace and Electronic System, 2016, 52(4): 1777-1796. doi:  10.1109/TAES.2016.7738355
[20]

Silva F O, Hemerly E M, Leite-Filho W C, et al. A fast in-field coarse alignment and bias estimation method for stationary intermediate-grade IMUs [J]. IEEE Transactions on Instrumentation and Measurement, 2017, 67(4): 831-838.