[1] Kruth J P, Deckers J, Yasa E, et al. Assessing and comparing influencing factors of residual stresses in selective laser melting using a novel analysis method [J]. Journal of Engineering Manufacture, 2012, 226(6): 980-991.
[2]
[3]
[4] Wang D, Yang Y, Su X, et al. Study on energy input and its influences on single-track, multi-track, and multi-layer in SLM[J]. The International Journal of Advanced Manufacturing Technology, 2012, 58(9-12): 1189-1199.
[5] Craeghs T, Bechmann F, Berumen S, et al. Feedback control of Layerwise Laser Melting using optical sensors [J]. Physics Procedia, 2010, 5: 505-514.
[6]
[7]
[8] Shiomi M, Yoshidome A, Abe F, et al. Finite element analysis of melting and solidifying processes in laser rapid prototyping of metallic powders[J]. International Journal of Machine Tools and Manufacture, 1999, 39(2): 237-252.
[9]
[10] Hussein A, Hao L, Yan C, et al. Finite element simulation of the temperature and stress fields in single layers built without-support in selective laser melting[J]. Materials Design, 2013, 52: 638-647.
[11] Matsumoto M, Shiomi M, Osakada K, et al. Finite element analysis of single layer forming on metallic powder bed in rapid prototyping by selective laser processing[J]. International Journal of Machine Tools and Manufacture, 2002, 42(1): 61-67.
[12]
[13]
[14] Contuzzi N, Campanelli S L, Ludovico A D. 3D finite element analysis in the selective laser melting process[J].International Journal of Simulation Modelling, 2011, 10(3): 113-121.
[15]
[16] Li R, Shi Y, Liu J, et al. Effects of processing parameters on the temperature field of selective laser melting metal powder[J]. Powder Metallurgy and Metal Ceramics, 2009, 48(3-4): 186-195.
[17] Zeng K, Pal D, Gong H J, et al. Comparison of 3DSIM thermal modelling of selective laser melting using new dynamic meshing method to ANSYS[J]. Materials Science and Technology, 2015, 31(8): 945-956.
[18]
[19] Gusarov A V, Yadroitsev I, Bertrand P, et al. Heat transfer modelling and stability analysis of selective laser melting[J]. Applied Surface Science, 2007, 254(4): 975-979.
[20]
[21] Dai K, Shaw L. Finite element analysis of the effect of volume shrinkage during laser densification[J]. Acta Materialia, 2005, 53(18): 4743-4754.