[1] Xie Jun, Cao Lihua, Han Guangyu, et al. The surface error analysis of theodolite primary mirror considering contact boundary condition[J]. Acta Photonica Sinica, 2014, 43(12):1212004. (in Chinese) 谢军, 曹立华, 韩光宇, 等. 考虑接触边界条件的经纬仪主镜面形误差分析[J]. 光子学报, 2014, 43(12):1212004.
[2] Fan Lili, Zhang Jingxu, Yang Fei, et al. Impact of the supports of primary mirror in equatorial telescope on its surface deformation[J]. Infrared and Laser Engineering, 2012, 41(1):173-177. (in Chinese) 范李立, 张景旭, 杨飞, 等. 极轴式望远镜主镜支撑结构对镜面变形的影响[J]. 红外与激光工程, 2012, 41(1):173-177.
[3] Wang Fuguo, Yang Hongbo, Yang Fei, et al. Optimization and analysis for the axis support points position of the large aperture mirrors[J]. Infrared and Laser Engineering, 2007, 36(6):877-882. (in chinese) 王富国, 杨洪波, 杨飞, 等. 大口径主镜轴向支撑点位置优化分析[J]. 红外与激光工程, 2007, 36(6):877-882.
[4] Dong Deyi, Li Zhilai, Li Ruigang, et al. Simulation and experiment of influence of adhesive curing on reflective mirror surface[J]. Optics and Precision Engineering, 2014, 22(9):2451-2457. (in Chinese) 董得义, 李志来, 李锐钢, 等. 胶层固化对反射镜面形影响的仿真与试验[J]. 光学精密工程, 2014, 22(10):2451-2457.
[5] Sun Hang, Zhang Haibo, Cao Lihua, et al. Error compensation for primary mirror shaking of large aperture optical detection equipment[J]. Optics and Precision Engineering, 2014, 22(1):85-91. (in Chinese) 孙航, 张海波, 曹立华, 等. 大口径光电探测设备主镜晃动的误差补偿[J]. 光学精密工程, 2014, 22(1):85-91.
[6] Wu Xiaoxia, Li Jianfeng, Song Shumei, et al. Active support system for 4 m SiC lightweight primary mirror[J]. Optics and Precision Engineering, 2014, 22(9):2451-2457. (in Chinese) 吴小霞, 李剑锋, 宋淑梅, 等. 4mSiC轻量化主镜的主动支撑系统[J]. 光学精密工程, 2014, 22(9):2451-2457.
[7] Tan Fanjiao, Qiao Yanfeng, Li Yaobin, et al. Finite element analysis for surface shape deformation of photo-electronic theodolite primary mirror[J]. Acta Optic Sinica, 2008, 28(4):757-763. (in Chinese) 谭凡教, 乔彦峰, 李耀彬, 等. 光电经纬仪主镜面型变化的有限元分析[J]. 光学学报, 2008, 28(4):757-763.
[8] San Xiaogang, Sun Ning, Zhuo Renshan, et al. Design of supporting structure for primary mirror of large aperture theodolite[J]. Optics and Precision Engineering, 2013, 21(12):3112-3117. (in Chinese) 伞晓刚, 孙宁, 卓仁善. 大口径光电经纬仪主反射镜支撑结构设计[J]. 光学精密工程, 2013, 21(12):3112-3117.
[9] Wang Yang, Zhang Jingxu. Optimization and analysis for the support of the large aperture telescope primary mirror[J]. Opto-Electronic Engineering, 2009, 36(1):107-113. (in Chinese) 王洋, 张景旭. 大口径望远镜主镜支撑优化分析[J]. 光电工程, 2009, 36(1):107-113.
[10] Zhou Chao, Wang Zhi, Zhao Yongzhi, et al. Supporting effect study on primary mirror of ground-based telescope[J]. Opto-Electronic Engineering, 2011, 38(9):84-87. (in Chinese) 周超, 王志, 赵勇志, 等. 地基望远主镜支撑性能分析[J]. 光电工程, 2011, 38(9):84-87.