[1] |
|
[2] |
Pei Nianqiang, Guo Kaihua, Liu Jie. Applied calculation of peltier cooler in one new LHP [J]. Chinese Journal of Low Temperature Physics, 2007, 29(1): 42-45. (in Chinese) 裴念强, 郭开华,刘杰. 半导体制冷在新型环路热管的应用 计算[J]. 低温物理学报, 2007, 29(1): 42-45. |
[3] |
Shen Limei, Chen Huanxin, Zhang Wei, et al. Analysis of the crucial factors affecting the performance of thermoelectric cooling [J]. Infrared and Laser Engineering, 2011, 40(10): 1866-1872. (in Chinese)申利梅, 陈焕新, 张威, 等. 影响热电制冷性能的关键因素 及其分析[J]. 红外与激光工程, 2011, 40(10): 1866-1872. |
[4] |
|
[5] |
|
[6] |
Zhang Jiancheng. Study of heat transfer about heat pipe type cooler of semiconductor refrigerating element [J]. Southeast University, 2000, 30(5): 38-41. (in Chinese) 张建成. 半导体制冷的热管式散热器传热研究[J]. 东南大 学学报, 2000, 30(5): 38-41. |
[7] |
|
[8] |
Li Mingshan, Zhang Wenping, Wang Shiyu, et al. Opitmal thermal dissipation of LD in high power DPL under high temperature environment [J]. Infrared and Laser Engineering, 2008, 37(2); 221-225. (in Chinese) 李明山, 张文平, 王石语, 等. 高温环境下大功率DPL 的LD 最佳散热效果[J]. 红外与激光工程, 2008, 37(2): 221-225. |
[9] |
Lian Xinhao, Yan Yinxue. Thermal design of focal plane assembly on space-borne camera based on thermo-electric cooling technology [J]. Spacecraft Recovery Remote Sensing, 2011.32(3): 43-50. (in Chinese) 连新昊, 颜吟雪. 基于热电制冷技术的某星载相机焦面组 件热设计[J]. 航天返回与遥感, 2011, 32(3): 43-50. |
[10] |
|
[11] |
Baggett S M, Hill R J, Kimble R A. The wide-field camera 3 detectors[C]//SPIE, 2008, 7021: 70211Q-1-11. |
[12] |
|
[13] |
|
[14] |
Marc D Rafal. Thermal design for the advanced camera for surveys[C]//SPIE, 1998, 3356: 301-307. |
[15] |
Gregory B Johnson. Thermal management for CCD performance on the advanced camera for surveys(ACS)[C] // SPIE, 1998, 3356: 284-291. |
[16] |
|
[17] |
|
[18] |
David E Neuberger, James C Bremer, Margo Mehoke. Advanced geosyncronous studies imager thermal design[C] // SPIE, 1999, 3750: 68-78. |
[19] |
Zhang Jianzhong, Wang Zesheng. Reliability design of the thermoelectric cooler [C]//Proceedings of The 8th Conference on Reliability, Chinese Institute of Electronics, 1996: 26-31. |