| [1] | Zhang Chaojie, Xi Xinghua, Wang Yongxian, et al. Structural optimization design of large-aperture mirror for space remote sensing camera [J]. Infrared and Laser Engineering, 2020, 49(2): 0214002. (in Chinese) doi: 10.3788/IRLA202049.0214002 |
| [2] | Feng Liangjie, Cheng Pengfei, Wang Wei. Design of Φ450 mm light-weighted SiC mirror subsystem in space-based astronomy telescope [J]. Infrared and Laser Engineering, 2021, 50(2): 20200175. (in Chinese) doi: 10.3788/IRLA20200175 |
| [3] | Zhou Yuxiang, Shen Xia. Structure design of backside bipod flexure mount for space reflector [J]. Laser Technology, 2017, 41(1): 141-145. (in Chinese) |
| [4] | 连华东, 金建高, 宫辉. 空间反射镜Bipod结构设计研究 [C]//第二十三届全国空间探测学术交流会, 2010: 1-9. |
| [5] | Gao Chao, Chen Fang, Sun Haiyang. Design and error analysis of measurement structure for large aperture space camera mainboard [J]. Infrared and Laser Engineering, 2020, 49(10): 20200046. (in Chinese) doi: 10.3788/IRLA20200046 |
| [6] | Jiang Yanhui, Liu Yong, Zou Baocheng, et al. Gravity unloading design of large aperture reflect mirror [J]. Environmental Technology, 2020(1): 81-85. (in Chinese) doi: 10.3969/j.issn.1004-7204.2020.01.019 |
| [7] | Chen Hongda, Chen Yonghe, Shi Tingting, et al. Lightweight and mounting design for primary mirror in space camera [J]. Infrared and Laser Engineering, 2014, 43(2): 535-540. (in Chinese) doi: 10.3969/j.issn.1007-2276.2014.02.037 |
| [8] | Sun Yixuan, Luo Shikui, Gao Chao, et al. Optimization method for large-aperture space mirror's gravity unload [J]. Infrared and Laser Engineering, 2020, 50(1): 20200103. (in Chinese) doi: 10.3788/IRLA20200103 |
| [9] | Yang Qiushi, Zhang Jiyou, Yu Jianhai, et al. Research on error analysis of support deformation for large aperture space mirrors [J]. Spacecraft Recovery & Remote Sensing, 2020, 41(3): 60-70. (in Chinese) doi: 10.3969/j.issn.1009-8518.2020.03.007 |
| [10] | Dong Deyi, Li Zhilai, Li Ruigang, et al. Simulation and experiment of influence of adhesive curing on reflective mirror surface [J]. Optics and Precision Engineering, 2014, 22(10): 2698-2707. (in Chinese) doi: 10.3788/OPE.20142210.2698 |
| [11] | Meng Xiaohui, Wang Yonggang, Ma Xianmei, et al. Fabrication and test for Φ520 mm secondary mirror of on-axis three mirror space camera [J]. Infrared and Laser Engineering, 2017, 46(8): 0818002. (in Chinese) doi: 10.3788/IRLA201746.0818002 |
| [12] | Wang Cong, Chen Jiayi, Li Mengjuan, et al. Centering of Φ1.3 m aspheric reflector based on interferometry [J]. Infrared and Laser Engineering, 2020, 49(1): 0113001. (in Chinese) doi: 10.3788/IRLA202049.0113001 |
| [13] | Yang Liwei, Li Zhilai, Xue Donglin, et al. Extracting zero-gravity surface figure of mirror by orientation reversal [J]. Chinese Optics, 2016, 9(5): 606-612. (in Chinese) doi: 10.3788/co.20160905.0606 |
| [14] | Chen Jiayi, Wang Haichao, Huo Tengfei, et al. Assembly for Φ1.3 m aperture telescope [J]. Optical Technigue, 2021, 47(1): 12-16. (in Chinese) |
| [15] | Zhou Yuming, Yang Qiushi, Meng Xiaohui, et al. Verification and application of gravity flip test method for large aperture optical components [J]. Spacecraft Recovery & Remote Sensing, 2019, 40(3): 33-39. (in Chinese) doi: 10.3969/j.issn.1009-8518.2019.03.005 |