[1] |
杨亮亮. 衍射光学元件斜入射衍射效率的测量[J]. 红外与激光工程, 2018, 47(1): 0117003. doi: 0117003
Yang Liangliang. Measurement of diffraction efficiency for diffractive optical elements with oblique incidence [J]. Infrared and Laser Engineering, 2018, 47(1): 0117003. (in Chinese) doi: 0117003 |
[2] |
Zhang S J, To S. A theoretical and experimental investigation into multimode tool vibration with surface generation in ultra-precision diamond turning [J]. International Journal of Machine Tools & Manufacture, 2013, 72: 32−36. |
[3] |
王朋, 薛栋柏, 张昊, 等. 红外晶体等距恒速单点金刚石车削[J]. 红外与激光工程, 2019, 48(7): 0742001. doi: 10.3788/IRLA201948.0742001
Wang Peng, Xue Dongbai, Zhang Hao, et al. ESCV cutting method during infrared crystal single point diamond turning process [J]. Infrared and Laser Engineering, 2019, 48(7): 0742001. (in Chinese) doi: 10.3788/IRLA201948.0742001 |
[4] |
Steven C Fawcett, Darell Engelhaupt. Development of WolterⅠX-ray optics by diamond turning and electrochemical replication [J]. Precision Engineering, 1995, 17: 290−297. doi: 10.1016/0141-6359(95)00018-9 |
[5] |
Chon K S , Namba Y, Yoon K H. Precision machining of electroless nickel mandrel and fabrication of replicated mirrorsfor a soft x-ray microscope [J]. JSME Int J Ser C, 2006, 49: 56−62. doi: 10.1299/jsmec.49.56 |
[6] |
Yuetian Huang, Bin Fan, Yongjian Wan, et al. Improving the performance of single point diamond turning surface with ion beam figuring [J]. Optik- International Journal for Light and Electron Optics, 2018, 172: 540−544. doi: 10.1016/j.ijleo.2018.07.039 |
[7] |
Nambaa Y, Shimomura T, Fushiki A, et al. Ultra-precision polishing of electroless nickel molding dies for shorter wavelength applications [J]. CIRP Annals - Manufacturing Technology, 2008, 57: 337−340. doi: 10.1016/j.cirp.2008.03.077 |
[8] |
Li Z Z, Wang J M, Peng X Q, et al. Removal of single point diamond-turning marks by abrasive jet polishing [J]. Applied Optics, 2011, 50(16): 2458−2463. doi: 10.1364/AO.50.002458 |
[9] |
Beaucamp A, Namba Y. Super-smooth finishing of diamond turned hard X-ray molding dies by combined fluid jet and bonnet polishing [J]. CIRP Annals - Manufacturing Technology, 2013, 62: 315−318. doi: 10.1016/j.cirp.2013.03.010 |
[10] |
王朋, 杜雪, 回长顺. 金刚石车削表面微纳织构的气囊抛光改进[J]. 光学学报, 2015, 35(3): 0322001. doi: 10.3788/AOS201535.0322001
Wang Peng, Suet To, Hui Changshun. Improvement of the diamond turned surface texture by bonnet polishing process [J]. Acta Optica Sinica, 2015, 35(3): 0322001. (in Chinese) doi: 10.3788/AOS201535.0322001 |
[11] |
Dumas P, Golini D, Tricard M. Improvement of figure and finish of diamond turned surfaces with magneto-rheological finishing[C]// Proc SPIE, 2005, 5786: 296–304 . |