[1]
[2] Xing Suxia, Zhang Junju, Chang Benkang, et al. Recent development and status of uncooled IR thermal imaging technology[J]. Infrared and Laser Engineering, 2004, 33(5): 441-444. (in Chinese)
[3] 邢素霞,张俊举,常本康,等.非制冷红外热成像技术的发展与现状[J]. 红外与激光工程, 2004, 33(5): 441-444.
[4]

Li Xu, Yang Hu. Application of a nonuniformity correction algorithm for IRFPAs based on two points[J]. Infrared and Laser Engineering, 2008, 37(s2): 608-610. (in Chinese)
[5]

Zhang Ke, Zhao Guifang, Cui Ruiqing, et al. Method of improving bad pixel detection precision of IRFPA[J]. Infrared and Laser Engineering, 2007,36(4): 453-456. (in Chinese)
[6]
[7]
[8]

Zhou Huixin, Yin Shimin, Liu Shangqian, et al. Algorithm of blind pixels auto-searching and compensation for IRFPA[J]. Acta Photonica Sinica, 2004, 33(5): 598-600. (in Chinese)
[9] 李旭, 杨虎. 基于两点的红外图像非均匀性校正算法应用[J]. 红外与激光工程, 2008, 37(s2): 608-610.
[10]

Lai Rui, Liu Shangqian,Zhou Huixin, et al. Blind-pixel detection for infrared focal plane arrays[J]. Semiconductor Optoelectronics, 2005, 26(3):199-201. (in Chinese)
[11]

D'Agostino J A, Webb C M. Three-dimensional analysis framework and measurement methodology for imaging system noise[C]//SPIE, 1991, 1488: 110-121.
[12]
[13]
[14]

Lopez-Alonso J M, Alda J, Bernabeu E. Principal-component characterization of noise for infrared images[J]. Applied Optics, 2002, 41(2): 320-331.
[15] 张科, 赵桂芳, 崔瑞青, 等. 一种提高红外焦平面阵列盲元检测精度的方法[J]. 红外与激光工程, 2007, 36(4): 453-456.
[16]

Lopez-Alonso J M, Alda J. Bad pixel identification by means of principal components analysis[J]. Optical Engineering, 2002, 41(9): 2152-2157.
[17]
[18]
[19] 周慧鑫, 殷世民, 刘上乾, 等.红外焦平面器件盲元检测及补偿算法[J]. 光子学报, 2004, 33(5): 598-600.
[20]
[21]
[22]
[23]