[1] 袁永华, 刘常龄, 王春彦等. 连续YAG激光辐照涂层45~#钢的温升和升温率研究[J]. 强激光与粒子束, 1998, 10(3): 61-64.

Yuan Y H, Liu C L, Wang C Y, et al. Analysis on temperature rise and its rate of coated 45# steel irradiated by CW-YAG laser [J]. High Power Laser and Particle Beams, 1998, 10(3): 61-64. (in Chinese)
[2]

Khan O U, Yilbas B. Laser heating of sheet metal and thermal stress development. [J]. Journal of Materials Processing Technology, 2004, 155: 2045-2050.
[3] 秦渊, 毕娟, 倪晓武等. 毫秒激光金属打孔的解析和实验[J]. 光学精密工程, 2011, 19(2): 340-347. doi:  10.3788/OPE.20111902.0340

Qin Y, Bi J, Ni X W, et al. Analysis and experiment on millisecond pulsed laser drilling of metals [J]. Optics and Precision Engineering, 2011, 19(2): 340-347. (in Chinese) doi:  10.3788/OPE.20111902.0340
[4]

Li C, Gao X, Anliang Y Z, et al. Thermal properties of aluminum target irradiated by combined CW/pulsed laser beam [J]. Journal of Changchun University of Science and Technology(Natural Science Edition), 2018, 41(2): 1-6. (in Chinese)
[5]

Li M Y, Ye J J, Yu C H, et al. Experimental study on propulsive performance of typical metal ablated by nanosecond pulse width laser [J]. Infrared and Laser Engineering, 2012, 49(S2): 20200086. (in Chinese) doi:  10.3788/IRLA20200086
[6] 焦路光, 赵国民, 江厚满. 切向气流作用下激光对典型金属靶的辐照效应[J]. 中国光学, 2011, 4(1): 77-81. doi:  10.3969/j.issn.2095-1531.2011.01.012

Jiao L G, Zhao G M, Jiang H M. Irradiation effects of laser on typical metal targets under tangential airflow [J]. Chinese Optics, 2011, 4(1): 77-81. (in Chinese) doi:  10.3969/j.issn.2095-1531.2011.01.012
[7] 郑艳丽, 杜太焦, 束庆邦等. 不同气流环境下激光辐照金属材料温升的数值模拟[J]. 强激光与粒子束, 2010, 22(11): 2531-2534. doi:  10.3788/HPLPB20102211.2531

Zheng Y L, Du T J, Shu Q B, et al. Numerical simulation of thermal effect on metal irradiated by high-power laser beam in different airflow [J]. High Power Laser and Particle Beams, 2010, 22(11): 2531-2534. (in Chinese) doi:  10.3788/HPLPB20102211.2531
[8] 袁春. 不同气流环境下DF激光对45~#钢靶的辐照效应研究[D]. 国防科学技术大学, 2011.

Yuan C. The 45# Steel interaction with the DF laser beam in different gas flow[D]. Changsha: National University of Defense Technology, 2011. (in Chinese)
[9] 李君神, 赵国民, 焦路光等. 切向气流作用下激光对薄铝板辐照效应的初步研究[J]. 红外与激光工程, 2013, 42(11): 2962-2966. doi:  10.3969/j.issn.1007-2276.2013.11.017

Li J S, Zhao G M, Jiao G L, et al. Preliminary study on effects of laser irradiation on thin aluminum alloy sheet in tangential flow [J]. Infrared and Laser Engineering, 2013, 42(11): 2962-2966. (in Chinese) doi:  10.3969/j.issn.1007-2276.2013.11.017
[10] 蒙文, 张文杰, 李云霞等. 切向气流作用下激光辐照对尼龙材料的热烧蚀规律[J]. 光学精密工程, 2017, 25(2): 351-357. doi:  10.3788/OPE.20172502.0351

Meng W, Zhang W J, Li Y X, et al. Thermal ablation law of laser irradiation on nylon materials under tangential airflow [J]. Optics and Precision Engineering, 2017, 25(2): 351-357. (in Chinese) doi:  10.3788/OPE.20172502.0351
[11]

Amara E H, Kheloufi K, Tamsaout T, et al. Numerical investigations on high-power laser cutting of metals [J]. Applied Physics A, 2015, 119(4): 1245-1260. doi:  10.1007/s00339-015-9154-8
[12] 张东来, 宋雄杰, 丁磊等. 切向气流下激光对旋转靶热烧蚀的数值模拟[J]. 激光与红外, 2017, 47(3): 261-266. doi:  10.3969/j.issn.1001-5078.2017.03.001

Zhang D L, Song X J, Ding L, et al. Simulation of thermal ablation of rolling target irradiated by laser under tangential air flow [J]. Laser & Infrared, 2017, 47(3): 261-266. (in Chinese) doi:  10.3969/j.issn.1001-5078.2017.03.001
[13] 刘峰, 彭国良, 杜太焦等. 切向气流对激光加热金属板非熔化穿孔效应的影响[J]. 中国光学, 2013, 6(3): 332-342. doi:  10.3788/co.20130603.0332

Liu F, Peng G L, Du T J. Influence of tangential airflows on burn-througheffect with no-melting of metal heated by laser [J]. Chinese Optics, 2013, 6(3): 332-342. (in Chinese) doi:  10.3788/co.20130603.0332
[14] 张黎, 张永强, 贺佳等. 高速气流作用下能量加载金属蜂窝板数值模拟[J]. 强激光与粒子束, 2017, 29(7): 28-32.

Zhang L, Zhang Y Q, He J, et al. Numerical simulation of metallic honeycomb plates with energy addition in high velocity flow [J]. High Power Laser and Particle Beams, 2017, 29(7): 28-32. (in Chinese)
[15]

Baumann S M, Hurst B E, Marciniak M A, et al. Fiber laser heating and penetration of aluminum in shear flow [J]. Optical Engineering, 2014, 53(12): 122510. doi:  10.1117/1.OE.53.12.122510