Volume 45 Issue 5
Jun.  2016
Turn off MathJax
Article Contents

Hong Tianqi, Huang Zhe, Yang Linghui, Guo Siyang, Zou Jian, Ye Shenghua. Alignment of strapdown inertial navigation system based on extra measuring device[J]. Infrared and Laser Engineering, 2016, 45(5): 531002-0531002(5). doi: 10.3788/IRLA201645.0531002
Citation: Hong Tianqi, Huang Zhe, Yang Linghui, Guo Siyang, Zou Jian, Ye Shenghua. Alignment of strapdown inertial navigation system based on extra measuring device[J]. Infrared and Laser Engineering, 2016, 45(5): 531002-0531002(5). doi: 10.3788/IRLA201645.0531002

Alignment of strapdown inertial navigation system based on extra measuring device

doi: 10.3788/IRLA201645.0531002
  • Received Date: 2015-10-05
  • Rev Recd Date: 2015-11-03
  • Publish Date: 2016-05-25
  • In an integrated location system, the establishment of mutual attitude relationships between different subsystems is accomplished by the alignment processing. When the inertial component is used for positioning, the attitude and heading reference system(AHRS) is generally based on geographic coordinate system(E-N-U) as the navigation coordinate system. However, during indoor navigation task, the navigation coordinate system is generally based on the users' requirement such as marked points or workpiece coordinate system. In this paper a new alignment method based on direction cosine matrix was proposed for the integrated positioning system of indoor mobile object. The transformation between geographic coordinate system and external reference coordinate system can be achieved by the method.Then coordinate system of laser tracker became navigation reference and real-time and precise transformation between different coordinate systems can be realized by this new alignment method.Experimental results show that the measured RMS errors for attitude angles after transformation are less than 0.25 while the AHRS is in arbitrary position and orientation.
  • [1] Yuan Beijiang, Chen Dongdong, Wang Tianmiao. AGV system based on multi-sensor information fusion[C]//2014 International Symposium on Computer, Consumer and Control, 2014: 900-5.
    [2] Oleari F, Magnani M, Ronzoni D. Industrial AGVs: toward a pervasive diffusion in modern factory ware houses[C]//2014 IEEE International Conference on Intelligent Computer Communication and Processing, 2014: 233-238.
    [3] Han Lu, Jing Zhanrong, Duan Zhemin. Laser gyro/GPS integrated attitude estimation systemfor ballistic missile[J]. Infrared and Laser Engineering, 2011, 40(5): 915-920. (in Chinese)韩璐, 景占荣, 段哲民. 采用激光陀螺/GPS的导弹组合定姿系统[J]. 红外与激光工程, 2011, 40(5): 915-920.
    [4] Huang Yuan, Wang Kedong, Liu Bao. INS/CNS integration schemes for a maneuvering spacecraft[J]. Infrared and Laser Engineering, 2012, 41(6): 1622-1528. (in Chinese)黄远, 王可东, 刘宝. 机动天基平台惯性/天文导航组合模式研究[J]. 红外与激光工程, 2012, 41(6): 1622-1528.
    [5] Qin Yongyuan. Inertial Navigation II[M]. Beijing: Scinces Press, 2014. (in Chinese)秦永元. 惯性导航(第二版)[M]. 北京: 科学出版社, 2014.
    [6] Tazartes D. An historical perspective on inertial navigation systems[C]//2014 IEEE International Symposium on Inertial Sensors and Systems, 2014, 12: 25-26.
    [7] Zhang Guangjun. Vision Measurement[M]. Beijing: Science Press, 2008. (in Chinese)张广军. 视觉测量[M]. 北京: 科学出版社, 2008.
    [8] Cui Kai, Liu Zhaohui, Li Zhiguo, et al. Calibrating tracing errors for space-used telescopeby coordinate transformation[J]. Infrared and Laser Engineering, 2014, 43(S): 151-156. (in Chinese)崔凯, 刘朝晖, 李治国, 等. 坐标变换在空间望远镜误差标定中的应用[J]. 红外与激光工程, 2014, 43(S): 151-156.
    [9] Zhang Bo, Wei Zhenzhong, Zhang Guangjun. Rapid coordinate transformation between a robot and a laser tracker[J]. Chinese Journal of Scientific Instrument, 2010, 31(9): 1986-1990. (in Chinese)张博, 魏振忠, 张广军. 机器人坐标系与激光跟踪仪坐标系的快速转换方法[J]. 仪器仪表学报, 2010, 31(9): 1986-1990.
  • 加载中
通讯作者: 陈斌, bchen63@163.com
  • 1. 

    沈阳化工大学材料科学与工程学院 沈阳 110142

  1. 本站搜索
  2. 百度学术搜索
  3. 万方数据库搜索
  4. CNKI搜索

Article Metrics

Article views(430) PDF downloads(146) Cited by()

Related
Proportional views

Alignment of strapdown inertial navigation system based on extra measuring device

doi: 10.3788/IRLA201645.0531002
  • 1. State Key Laboratory of Precision Measuring Technology &Instruments,Tianjin University,Tianjin 300072,China;
  • 2. Department of Optics & Electronic Engineering,Ordnance Engineering College,Shijiazhuang 050003,China

Abstract: In an integrated location system, the establishment of mutual attitude relationships between different subsystems is accomplished by the alignment processing. When the inertial component is used for positioning, the attitude and heading reference system(AHRS) is generally based on geographic coordinate system(E-N-U) as the navigation coordinate system. However, during indoor navigation task, the navigation coordinate system is generally based on the users' requirement such as marked points or workpiece coordinate system. In this paper a new alignment method based on direction cosine matrix was proposed for the integrated positioning system of indoor mobile object. The transformation between geographic coordinate system and external reference coordinate system can be achieved by the method.Then coordinate system of laser tracker became navigation reference and real-time and precise transformation between different coordinate systems can be realized by this new alignment method.Experimental results show that the measured RMS errors for attitude angles after transformation are less than 0.25 while the AHRS is in arbitrary position and orientation.

Reference (9)

Catalog

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return