Volume 46 Issue 11
Dec.  2017
Turn off MathJax
Article Contents

Li Shengfu, Zhao Yu, Chen Guanghua, Luo Zhenxiong, Ye Yan. Extraction of particle size via Fourier ptychography with selective illuminations[J]. Infrared and Laser Engineering, 2017, 46(11): 1103005-1103005(8). doi: 10.3788/IRLA201746.1103005
Citation: Li Shengfu, Zhao Yu, Chen Guanghua, Luo Zhenxiong, Ye Yan. Extraction of particle size via Fourier ptychography with selective illuminations[J]. Infrared and Laser Engineering, 2017, 46(11): 1103005-1103005(8). doi: 10.3788/IRLA201746.1103005

Extraction of particle size via Fourier ptychography with selective illuminations

doi: 10.3788/IRLA201746.1103005
  • Received Date: 2017-09-05
  • Rev Recd Date: 2017-11-03
  • Publish Date: 2017-11-25
  • A method, which can extract the particle size information with a resolution beyond /NA, was proposed. This was achieved by applying Fourier ptychographic(FP) ideas to the present problem. In a typical FP imaging platform, a 2D LED array was used as light sources for angle-varied illuminations, a series of low-resolution images were taken by a full sequential scan of the array of LEDs, and the data were then combined to produce a high-resolution image. Here, the particle size information was extracted by turning on each single LED on a circle, whose radius was chosen according to an expression for the resolution limit. The simulated results show that the proposed method can reduce the total number of images without loss of reliability in the results, and the total number of images can be further reduced by optimizing the aperture overlapping rate.
  • [1] Katz J, Sheng J. Applications of holography in fluid mechanics and particle dynamics[J]. Annu Rev Fluid Mech, 2012, 42:531-555.
    [2] Jiang Lu, Raymond A S, Yang Weidong. Improved particle size estimation in digital holography via sign matched filtering[J]. Opt Express, 2012, 20(12):12666-12674.
    [3] Fugal J P, Shaw R A. Cloud particle size distributions measured with an airborne digital in-line holographic instrument[J]. Atmos Meas Tech, 2009, 2:259-271.
    [4] Shi Zhenhua, Lin Guanyu, Wang Shurong, et al. Numerical analysis of small particle measurement based on the theory of laser scattering[J]. Infrared and Laser Engineering, 2015, 44(7):2189-2194. (in Chinese)
    [5] Yang Chunling, Zhang Zhendong, Liu Guocheng. Influence of particle radius of composition on radiation characteristics of infrared decoy[J]. Infrared and Laser Engineering, 2016, 45(S1):S104005. (in Chinese)
    [6] Denis L, Fournier C, Fournel T, et al. Direct extraction of the mean particle size from a digital hologram[J]. Appl Opt, 2006, 45(5):944-952.
    [7] Pan G, Meng H. Digital holography of particle fields:reconstruction by use of complex amplitude[J]. Appl Opt, 2003, 42(5):827-833.
    [8] Yang W, Kostinski A B, Shaw R A. Depth-of-focus reduction for digital in-line holography of particle fields[J]. Opt Lett, 2005, 30(11):1303-1305.
    [9] Soulez F, Denis L, Fournier C, et al. Inverse problem approach for particle digital holography:accurate location based on local optimisation[J]. J Opt Soc Am A, 2007, 24(4):1164-1171.
    [10] Dixon L, Cheong F C, Grier D G. Holographic deconvolution microscopy for high-resolution particle tracking[J]. Opt Express, 2011, 19(11):16410-16417.
    [11] Zheng G, Horstmeyer R, Yang C. Wide-field, high-resolution Fourier ptychographic microscopy[J]. Nat Photonics, 2013, 7(9):739-745.
    [12] Tian L, Li X, Ramchandran K, et al. Multiplexed coded illumination for Fourier ptychography with an LED array microscope[J]. Biomed Opt Express, 2014, 5(7):2376-2389.
    [13] Bian L, Suo J, Situ G, et al. Content adaptive illumination for Fourier ptychography[J]. Opt Lett, 2014, 39(23):6648-6651.
    [14] Ou X, Zheng G, Yang C. Embedded pupil function recovery for Fourier ptychographic microscopy[J]. Opt Express, 2014, 22(5):4960-4972.
    [15] Archimedes. From wikipedia, the free encyclopedia[EB/OL]. (2017-01-01). https://en.wikipedia.org/wiki/Archimedes.
    [16] Li Changtsun, Lou Derchyuan. Edge detection based on the multiresolution Fourier transform[C]//IEEE Workshop, Signal Processing Systems, 1999.
    [17] Wang L, Jacques S L, Zheng L Q. MCML-Monte Carlo modeling of lighttransport in multilayered tissues[J]. Comput Methods Prog Biomed, 1995, 47(2):131-146.
    [18] Sun J, Chen Q, Zhang Y, et al. Efficient positional misalignment correction method for Fourier ptychographic microscopy[J]. Biomed Opt Express, 2016, 7(4):1336.
    [19] Sun J, Zuo C, Zhang L, et al. Resolution-enhanced Fourier ptychographic microscopy based on high-numerical-aperture illuminations[J]. Scientific Reports, 2017, 7(1):1187.
    [20] Guo K, Dong S, Zheng G. Fourier ptychography for brightfield, phase, darkfield, reflective, multi-Slice, and fluorescence imaging[J]. IEEE Journal of Selected Topics in Quantum Electronics, 2016, 22(4):77-88.
    [21] Tian L, Waller L. 3D intensity and phase imaging from light field measurements in an LED array microscope[J]. Optica, 2016, 22(7):104-111.
    [22] Sun J, Chen Q, Zhang Y, et al. Sampling criteria for Fourier ptychographic microscopy in object space and frequency space[J]. Opt Express, 2016, 24(14):15765-15781.
  • 加载中
通讯作者: 陈斌, bchen63@163.com
  • 1. 

    沈阳化工大学材料科学与工程学院 沈阳 110142

  1. 本站搜索
  2. 百度学术搜索
  3. 万方数据库搜索
  4. CNKI搜索

Article Metrics

Article views(511) PDF downloads(118) Cited by()

Related
Proportional views

Extraction of particle size via Fourier ptychography with selective illuminations

doi: 10.3788/IRLA201746.1103005
  • 1. Institute of Fluid Physics,China Academy of Engineering Physics,Mianyang 621900,China

Abstract: A method, which can extract the particle size information with a resolution beyond /NA, was proposed. This was achieved by applying Fourier ptychographic(FP) ideas to the present problem. In a typical FP imaging platform, a 2D LED array was used as light sources for angle-varied illuminations, a series of low-resolution images were taken by a full sequential scan of the array of LEDs, and the data were then combined to produce a high-resolution image. Here, the particle size information was extracted by turning on each single LED on a circle, whose radius was chosen according to an expression for the resolution limit. The simulated results show that the proposed method can reduce the total number of images without loss of reliability in the results, and the total number of images can be further reduced by optimizing the aperture overlapping rate.

Reference (22)

Catalog

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return