Huang Minshuang, Liu Xiaochen, Ma Peng. Periodic error compensation of pulsed time-of-flight laser ranging system[J]. Infrared and Laser Engineering, 2018, 47(3): 317004-0317004(5). doi: 10.3788/IRLA201847.0317004
| Citation:
|
Huang Minshuang, Liu Xiaochen, Ma Peng. Periodic error compensation of pulsed time-of-flight laser ranging system[J]. Infrared and Laser Engineering, 2018, 47(3): 317004-0317004(5). doi: 10.3788/IRLA201847.0317004
|
Periodic error compensation of pulsed time-of-flight laser ranging system
- 1.
Opto-Mechatronic Equipment Technology Beijing Area Major Laboratory,Beijing Institute of Petrochemical Technology,Beijing 102617,China;
- 2.
Mechanical and Electrical Engineering College,Beijing University of Chemical Industry,Beijing 100029,China
- Received Date: 2017-10-05
- Rev Recd Date:
2017-11-03
- Publish Date:
2018-03-25
-
Abstract
In the high precision pulse laser ranging system based on sine wave, due to the factor of high frequency signal crosstalk, or electronic and optical devices with nonlinear and other factors, which would cause pulse time-of-flight periodic error, the range accuracy is reduced. The method of calculating the timing error by using the measuring data of the range finder in a certain distance was presented. An error compensation function curve was constructed by least square fitting, this curve was discretized in a sinusoidal reference period, the discrete data was stored into the single chip. In the distance measurement, the error compensation function curve was used as the reference, the compensation of pulsed time-of-flight periodic error was realized. The method had the advantages of simple principle, reliable data, convenient operation and so on. After the error compensation of the laser pulse measurement, the distance error is within 3 mm.
-
References
|
[1]
|
Mohammadikaji M, Bergamann S, Irgenfried S, et al. A framework for uncertainty propagation in 3D shape measurement using laser triangulation[C]//IEEE International Instrumentation and Measurement Technology Conference Proceedings, 2016:7520324. |
|
[2]
|
Luo Yuan, He Yan, Geng Liming, et al. Long-distance laser ranging lidar based on photon counting technology[J]. Chinese Journal of Lasers, 2016, 43(5):0514001. (in Chinese) |
|
[3]
|
Gallay M, Hochmuth Z, KaNuk J, et al. Geomorphometric analysis of cave ceiling channels mapped with 3-D terrestrial laser scanning[J]. Hydrology Earth System Sciences Discussions, 2016, 20(5):1827-1849. |
|
[4]
|
Lindner L, Sergiyenko O, Rodriguez-Quinonez J C, et al. Mobile robot vision system using continuous laser scanning for industrial application[J]. Industrial Robot, 2016, 43(4):360-369. |
|
[5]
|
Kostamovarra J, Huikari J, Hallman L, et al. On laser ranging based on high-speed/energy laser diode pulses and single-photon detection techniques[J]. IEEE Photonics Journal, 2015, 7(2):1-15. |
|
[6]
|
Liang Fang, Sun Xiaoming. Crosstalk in intensity modulated-continuous wave laser rangefinder[J]. Optical Technique,1999(4):73-75. (in Chinese) |
|
[7]
|
Xu Qianhui. On the cycle error and error of unshapely phase with photoelectric ranger[J]. Journal of Wuhan Technical University of Surveying and Mapping, 1997, 22(2):156-159. (in Chinese) |
|
[8]
|
Fuijima I. Correction of cyclic error in optical waveguide distance meter[C]//Proceedings of SPIE, 1999, 3823:274-280. |
|
[9]
|
Huang Minshuang, Long Tengyu, Liu Huihui. A high-precision pulsed laser ranging time interval measurement technology based on sine curves method[J]. Chinese Journal of Lasers, 2014, 41(8):0808002. (in Chinese) |
-
-
Proportional views
-
DownLoad: