Xie Chenyu, Li Jianjun, Pang Weiwei, Xia Maopeng, Zheng Xiaobing. Reseach on calibration method of double-channel thermal-infrared standard radiometer[J]. Infrared and Laser Engineering, 2018, 47(4): 404002-0404002(7). doi: 10.3788/IRLA201847.0404002
Citation:
|
Xie Chenyu, Li Jianjun, Pang Weiwei, Xia Maopeng, Zheng Xiaobing. Reseach on calibration method of double-channel thermal-infrared standard radiometer[J]. Infrared and Laser Engineering, 2018, 47(4): 404002-0404002(7). doi: 10.3788/IRLA201847.0404002
|
Reseach on calibration method of double-channel thermal-infrared standard radiometer
- 1.
Key Laboratory of Optical Calibration and Characterization,Anhui Institute of Optics and Fine Mechanics,Chinese Academy of Sciences,Hefei 230031,China;
- 2.
University of Science and Technology of China,Hefei 230026,China
- Received Date: 2017-11-10
- Rev Recd Date:
2017-12-20
- Publish Date:
2018-04-25
-
Abstract
Blackbody radiation source as a primary standard, its measurement accuracy determines the uncertainty level of the whole traceability link. To improve the measurement accuracy of blackbodies' radiance, a double-channel thermal-infrared standard radiometer was developed. According to the principle of the instrument, calibration coefficients of the standard radiometer were obtained by using a high accuracy water-bath blackbody. Experimental results suggest that the radiometer's instability is less than 0.3% within one hour, uncertainty of fitting coefficient is less than 1.23%, and combined uncertainty is less than 0.39%, 1.3% in 5 m and 10 m channel respectively. This radiometer provides new means for tracing blackbody radiance directly to radiant standard in lab.
-
References
[1]
|
Xu Jun, Meng Binghuan, Zheng Xiaobing, et al. Calibration of common temperature blackbody based on thermal-infrared standard radiometer[J]. Infrared and Laser Engineering, 2013, 43(3):716-721. (in Chinese) |
[2]
|
Chen Muwang, Qi Hongxing, Gong Yumei, et al. Analysis of effect of calibration blackbody temperature stability on the infrared imaging[J]. Infrared and Laser Engineering, 2006, 35(6):652-654. (in Chinese) |
[3]
|
Rice J P, Johnson B C. The NIST EOS thermal infrared transfer radiometer[J]. Metrologia, 2010, 35:505-509. |
[4]
|
Rice J P, Bender S C, Atkins W H, et al. Deployment test of the NIST EOS thermal-infrared transfer radiometer[J]. International Journal of Remote Sensing, 2003, 24(2):367-388. |
[5]
|
Adriaan C C, Raju U D, Timothy M J, et al. Low-background temperature calibration of infrared blackbodies[J]. Metrologia, 2006, 43:46-50. |
[6]
|
Yue Wenlong. Research of the calibration technology for blackbody radiation source[D]. Xi'an:Xi'an Technological University, 2007. (in Chinese) |
[7]
|
Zhu Qihai, Li Xiansheng, Ren Jianwei, et al. Development and calibration of infrared double-channel spectral radiometer[J]. Optical Technique, 2006, 32(5):773-778. (in Chinese) |
[8]
|
Zhang Lei, Zheng Xiaobing, Zhang Liming, et al. High accuracy water bath blackbody based on the information quantification of infrared remote sensing[J]. Optical Technique, 2007, 33(2):245-251. (in Chinese) |
[9]
|
Zhang Lei. Study on the spectral radiometric calibration technique of infrared stand transfer detector[D]. Hefei:Anhui Institute of Optics and Fine Mechanics, Chinese Academy of Sciences, 2007. (in Chinese) |
[10]
|
Fang Qianqian, Fang Wei, Wang Kai, et al. Calculation of effective of blackbody cavities by Monte-Carlo method[J] Chinese Optics, 2012, 5(2):167-173. (in Chinese) |
[11]
|
Xun Jun. Research on calibration of ambient temperature blackbodies based on a thermal-infrared standard Radiometer[D]. Hefei:Anhui Institute of Optics and Fine Mechanics, Chinese Academy of Sciences, 2013. (in Chinese) |
-
-
Proportional views
-