Topological optimization design for SM system of large aperture telescope

Zhang Limin; Han Xida; Lv Tianyu; Zhao Hongchao

doi:10.3788/IRLA201847.0818008

Aiming at the precision requirement of machining and assembling for the SM system of the large-aperture grounded telescope, a design method for the structure of SM system based on topology optimization was presented. Based on the variable density idea of topology optimization, the ground structure was restricted to be the Spider and Serrurie trusses, the target was that the deformation along the expected direction was minimized, and the last appearance and dimension were described by whether the material was deleted from the ground structure or not. Firstly, the relative density was taken as design variable, and then by using 1st modal and deformation in gravity direction for the Spider and deformation along the X and Y axis for the truss as a design restraint, a topology optimization model was established. Secondly, on the basis of concept structure obtained by topology optimization, it was iterated and optimized by using Workbench. Finally, the optimized parameter was set, and the static and dynamic stiffness was analyzed and optimized using the finite element method. It shows that the 1st modal in the 4 m telescope SM system is 22.7 Hz, and the deviation in the direction of the gravity is -0.173 mm and -0.195 mm when the optical axis is parallel and vertical to the gravity direction, and the lightweight ratio exceeds 30% for the Spider and Serrurier truss, respectively. The results demonstrate the validity of the proposed approach properly.

Topological optimization design for SM system of large aperture telescope

1. Changchun Institute of Optics,Fine Mechanics and Physics,Chinese Academy of Sciences,Changchun 130033,China

Received Date: 2018-03-05

Rev Recd Date: 2018-04-03

Publish Date: 2018-08-25

Key words:

Abstract: Aiming at the precision requirement of machining and assembling for the SM system of the large-aperture grounded telescope, a design method for the structure of SM system based on topology optimization was presented. Based on the variable density idea of topology optimization, the ground structure was restricted to be the Spider and Serrurie trusses, the target was that the deformation along the expected direction was minimized, and the last appearance and dimension were described by whether the material was deleted from the ground structure or not. Firstly, the relative density was taken as design variable, and then by using 1st modal and deformation in gravity direction for the Spider and deformation along the X and Y axis for the truss as a design restraint, a topology optimization model was established. Secondly, on the basis of concept structure obtained by topology optimization, it was iterated and optimized by using Workbench. Finally, the optimized parameter was set, and the static and dynamic stiffness was analyzed and optimized using the finite element method. It shows that the 1st modal in the 4 m telescope SM system is 22.7 Hz, and the deviation in the direction of the gravity is -0.173 mm and -0.195 mm when the optical axis is parallel and vertical to the gravity direction, and the lightweight ratio exceeds 30% for the Spider and Serrurier truss, respectively. The results demonstrate the validity of the proposed approach properly.

HTML

Reference (12)

[1]	Liang Wenke, Liu Shunfa. Mechanical analysis of secondary mirror supporting structure[J]. Chinese Journal of Scientific Instrument, 2003, 11(5):466-471. (in Chinese)
[2]	Cheng Jingquan. The Principles of Astronomical Telescope Design[M]. Beijing:China Science Technology Press, 2003. (in Chinese)
[3]	Pierre Y Bely. The Design and Constructon of Large Optical Telescope[M]. New York:Springer, 2003.
[4]	Paul R Youder. Opto-mechanical Systems Design[M]. New York:Chemical Rubber Company, 2005.
[5]	Zhang Yurong. Research of the topology optimization design method based on the level set theory[D]. Harbin:Harbin Institute of Technology, 2013. (in Chinese)
[6]	Cheng Long, Wang Dong, Gu Song, et al. Multi-objective topology optimization design and test for support structure of star sensor[J]. Infrared and Laser Engineering, 2017, 46(5):0520001. (in Chinese)
[7]	Liu Zhongyu, Zhang Tao, Wang Ping, et al. Topology optimization design for main frame of infrared seeker's stabilization platform[J]. Infrared and Laser Engineering, 2016, 45(2):0218001. (in Chinese)
[8]	Xin Hongwei, Guan Yingjun, Chai Fangmao, et al. Design of main support of off-axis space remote sensor[J]. Optics and Precision Engineering, 2012, 20(6):1257-1264. (in Chinese)
[9]	Amstutz S. Connections between topological sensitivity analysis and material interpolation schemes in topology optimization[J]. Structural Multidisciplinary Optimization, 2011, 43(6):755-765.
[10]	Yu Gangzhen. The finite element analysis and research on topology for vehicle frame based on Ansys Workbench[D]. Harbin:Harbin Institute of Technology, 2014. (in Chinese)
[11]	Liu Shutian, Hu Rui, Zhou Ping, et al. Topologic optimization for configuration design of web-skin-type ground structure based large-aperture space mirror[J]. Optics and Precision Engineering, 2013, 21(7):1803-1810. (in Chinese)
[12]	Li Lin, Wang Dong, Tan Luyang, et al. Optimization design and test of a co-support structure of borne antenna and flywheel of a micro-satellite[J]. Infrared and Laser Engineering, 2016, 45(10):1018008. (in Chinese)

Topological optimization design for SM system of large aperture telescope

doi: 10.3788/IRLA201847.0818008

Abstract

References

Proportional views

通讯作者: 陈斌, bchen63@163.com

Article Metrics

Related

Proportional views