Volume 47 Issue 10
Oct.  2018
Turn off MathJax
Article Contents

Kong Xinyi, Ke changjun, Wu Tianhao, Hang Yin. Research on the characteristic of pulsed Fe2+: ZnSe mid-infrared laser at room temperature[J]. Infrared and Laser Engineering, 2018, 47(10): 1005001-1005001(5). doi: 10.3788/IRLA201847.1005001
Citation: Kong Xinyi, Ke changjun, Wu Tianhao, Hang Yin. Research on the characteristic of pulsed Fe2+: ZnSe mid-infrared laser at room temperature[J]. Infrared and Laser Engineering, 2018, 47(10): 1005001-1005001(5). doi: 10.3788/IRLA201847.1005001

Research on the characteristic of pulsed Fe2+: ZnSe mid-infrared laser at room temperature

doi: 10.3788/IRLA201847.1005001
  • Received Date: 2018-05-12
  • Rev Recd Date: 2018-06-03
  • Publish Date: 2018-10-25
  • Lasers in the 3-5 m waveband have many important scientific and military applications such as remote sensing, environmental protection, medical treatment, communication and infrared countermeasures. Fe2+:ZnSe crystal has become one of the most promising materials to generate laser in this region due to its advantages in material and optical properties. The characteristics of a polycrystalline ZnSe sample, which diffusion-doped with Fe2+ ions at a concentration of 31019/cm3, were investigated. The diameter and the thickness of the sample were 10 mm and 1 mm, respectively. The output characteristics of the Fe2+:ZnSe laser, which was excited by a non-chain electric-discharge pulsed HF laser, were studied at room temperature. A mid-infrared laser with the maximum output energy of 78.8 mJ at a center wavelength of 4 295 nm was obtained. The efficiency respecting to the absorbed pump energy was 27.7% and the slope efficiency was as high as 28.8%. The Fe2+:ZnSe laser was pumped at a small angle (3) with respect to the optical axis of the laser cavity instead of orthogonal-pump. It solved the problems that a HF laser and a Fe2+:ZnSe laser are both in the mid-infrared band.
  • [1] Ren W, Jiang W Z, Frank K. Single-QCL-based absorption sensor for simultaneous trace-gas detection of CH4 and N2O[J]. Appl Phys B, 2014, 117(1):245-251.
    [2] Sabbir L, Kevin A B, Laura X, et al. Noninvasive in vivo glucose sensing on human subjects using mid-infrared light[J]. Opt Express, 2014, 5(7):2397-2404.
    [3] Ke Changjun, Kong Xinyi, Wang Ran, et al. Research progress on mid-IR Fe:ZnSe laser technology[J]. Infrared and Laser Engineering, 2016, 45(3):0305002. (in Chinese)柯常军, 孔心怡, 王然, 等. 中红外Fe:ZnSe激光技术最新研究进展[J]. 红外与激光工程, 2016, 45(3):0305002.
    [4] Mirov S B, Fedorov V V, Martyshkin D, et al. Progress in mid-IR lasers based on Cr and Fe-doped Ⅱ-VI chalcogenides[J]. IEEE J Sel Top Quant, 2015, 21(1):1601719.
    [5] Adams J J, Bibeau C, Page R H, et al. 4.0-4.5m lasing of Fe:ZnSe below 180 K, a new mid-infrared laser material[J]. Opt Lett, 1999, 24(23):1720-1722.
    [6] Akimov V A, Voronov A A, Kozlovsky V I, et al. Efficient lasing in a Fe2+:ZnSe crystal at room temperature[J]. Quantum Electron, 2006, 36(4):299-301.
    [7] Myoung N, Fedorov V V, Mirov S B. Optically dense Fe:ZnSe crystals for energy scaled gain switched lasing[C]//SPIE, 2010, 7578:75781H.
    [8] Kernal J, Fedorov V V, Gallian A, et al. 3.9-4.8m gain-switched lasing of Fe:ZnSe at room temperature[J]. Opt Express, 2005, 13(26):10608-10615.
    [9] Frolov M P, Korostelin Y V, Kozlovsky V I, et al. Study of a 2-J pulsed Fe:ZnSe 4 m laser[J]. Laser Phys Lett, 2013, 10(12):125001-125007.
    [10] Yao Baoquan, Xia Shixing, Yu Kuaikuai, et al. Fe2+:ZnSe achieving laser output[J]. Chinese J Laser, 2015, 42(1):0119001. (in Chinese)姚宝权, 夏士兴, 于快快, 等. Fe2+:ZnSe实现中红外波段激光输出[J]. 中国激光, 2015, 42(1):0119001.
    [11] Ke Changjun, Wang Ran, Wang Xiangyong, et al. 15 mJ Fe2+:ZnSe laser operating at room temperature[J]. Chinese J Laser, 2015, 42(2):0219004. (in Chinese)柯常军, 王然, 王向永, 等. 室温Fe2+:ZnSe激光器获得15 mJ激光输出[J]. 中国激光, 2015, 42(2):0219004.
    [12] Apollonov V V, Kazantsev S Y, Oreshkin V F, et al. Nonchain electric-discharge HF(DF) laser with a high radiation energy[J]. Quantum Electron, 1998, 28(2):116-118.
    [13] Velikanov S D, Evdokimov P, Zapolsky A F, et al. Pulse periodic HF(DF) laser of atmospheric pressure with pulse repetition rate up to 2200 Hz[C]//SPIE, 2009, 7131:71311-71317.
  • 加载中
通讯作者: 陈斌, bchen63@163.com
  • 1. 

    沈阳化工大学材料科学与工程学院 沈阳 110142

  1. 本站搜索
  2. 百度学术搜索
  3. 万方数据库搜索
  4. CNKI搜索

Article Metrics

Article views(489) PDF downloads(48) Cited by()

Related
Proportional views

Research on the characteristic of pulsed Fe2+: ZnSe mid-infrared laser at room temperature

doi: 10.3788/IRLA201847.1005001
  • 1. Institute of Electronics,Chinese Academy of Sciences,Beijing 100190,China;
  • 2. University of Chinese Academy of Sciences,Beijing 100049,China;
  • 3. Shanghai Institute of Optics and Fine Mechanics,Chinese Academy of Sciences,Shanghai 201800,China

Abstract: Lasers in the 3-5 m waveband have many important scientific and military applications such as remote sensing, environmental protection, medical treatment, communication and infrared countermeasures. Fe2+:ZnSe crystal has become one of the most promising materials to generate laser in this region due to its advantages in material and optical properties. The characteristics of a polycrystalline ZnSe sample, which diffusion-doped with Fe2+ ions at a concentration of 31019/cm3, were investigated. The diameter and the thickness of the sample were 10 mm and 1 mm, respectively. The output characteristics of the Fe2+:ZnSe laser, which was excited by a non-chain electric-discharge pulsed HF laser, were studied at room temperature. A mid-infrared laser with the maximum output energy of 78.8 mJ at a center wavelength of 4 295 nm was obtained. The efficiency respecting to the absorbed pump energy was 27.7% and the slope efficiency was as high as 28.8%. The Fe2+:ZnSe laser was pumped at a small angle (3) with respect to the optical axis of the laser cavity instead of orthogonal-pump. It solved the problems that a HF laser and a Fe2+:ZnSe laser are both in the mid-infrared band.

Reference (13)

Catalog

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return