Non-contact measurement and experimental study on complex dynamic motion under high impact

Li Feiyin; Ma Shaojie; Man Xiaofei

doi:10.3788/IRLA201847.S117001

The multiple impact equipment of short interval and multiple impact loading is the key equipment to verify the high impact resistance and initiation control strategy for multi-layer penetration fuze in laboratory, the motion law of the moving part under high impact has an important influence on the consistency of acceleration. In view of measurement problem of complex dynamic motion process under multiple high impact, a non-contact measurement method based on high-speed photography and image processing was presented, obtaining pixel coordinate of feature point of the moving part by background difference and feature point detection, combining with the sub-pixel algorithm, further improving the accuracy of measurement. The results of high-speed photography were verified by contrast experiment and dynamic simulation, proving that the method is reasonable and feasible for complex dynamic motion process measurement under high impact, providing support for optimal design of the multiple impact equipment, also enriching the existing methods of complex dynamic motion measurement.

Non-contact measurement and experimental study on complex dynamic motion under high impact

1. School of Mechanical Engineering,Nanjing University of Science and Technology,Nanjing 210094,China

Received Date: 2018-03-18

Rev Recd Date: 2018-05-03

Publish Date: 2018-06-25

Key words:

Abstract: The multiple impact equipment of short interval and multiple impact loading is the key equipment to verify the high impact resistance and initiation control strategy for multi-layer penetration fuze in laboratory, the motion law of the moving part under high impact has an important influence on the consistency of acceleration. In view of measurement problem of complex dynamic motion process under multiple high impact, a non-contact measurement method based on high-speed photography and image processing was presented, obtaining pixel coordinate of feature point of the moving part by background difference and feature point detection, combining with the sub-pixel algorithm, further improving the accuracy of measurement. The results of high-speed photography were verified by contrast experiment and dynamic simulation, proving that the method is reasonable and feasible for complex dynamic motion process measurement under high impact, providing support for optimal design of the multiple impact equipment, also enriching the existing methods of complex dynamic motion measurement.

HTML

Reference (14)

[1]	Yan Ming, Zeng Zecui, Wang Yusheng. The impact analysis of waveform produced by the vibration and friction impacted on the lateral impact table[J]. Machinery Design Manufacture, 2015(8):39-41. (in Chinese)
[2]	Cao Juan, Zhang He, Wang Xiaofeng. Optimization of isolated protection for the hard-target penetration fuze[J]. Journal of Vibration and Shock, 2015, 34(24):192-196.
[3]	Song Linsen, Niu Beibei, Shao He. Design and research on spring-damper system of continuous impact vibration bench with high G[J]. Manufacturing Automation, 2014, 36(3):122-124. (in Chinese)
[4]	Cao Yun, Xi Zhanwen, Yu Pingxin, et al. Optical measurement of the dynamic contact process of a MEMS inertial switch under high shock loads[J]. IEEE Transactions on Industrial Electronics, 2017, 64(1):701-709.
[5]	Zhang Rong, Huang Haiying, Wei Jianfeng, et al. Test technique of shell movement parameters based on image processing[J]. Infrared and Laser Engineering, 2008, 37(2):292-295. (in Chinese)
[6]	Xue Rui, Xu Houqian, Li Yan, et al. Experimental study of particle flow field and gas flow field in the flame of pyrotechnic combustion[J]. Infrared and Laser Engineering, 2016, 45(5):0511002. (in Chinese)
[7]	Li Tenglong, He Junhua, Xie Zhengmao, et al. Optical design of wake bubbles measurement system[J]. Infrared and Laser Engineering, 2012, 41(9):2468-2473. (in Chinese)
[8]	Zhang Kangning. The research of the embedded target tracking algorithms based on the template update[D]. Changchun:Changchun University of Science and Technology, 2014. (in Chinese)
[9]	Harris C G, Stephens M J. A combined corner and edge detector[C]//Proceedings Fourth Alvey Vision Conference, 1988:147-151.
[10]	Zhao Jiwen, Wang Lizhi, Zhang Mei, et al. Image sub-pixel measurement algorithm for linear motor rotor position detection[J]. Chinese Journal of Scientific Instrument, 2013, 34(11):2592-2598. (in Chinese)
[11]	Pan Bing, Xu Boqin, Li Kejing. Performance of gradient operators in algorithm of gradient-based subpixel registration[J]. Optical Technique, 2005, 31(1):26-31.
[12]	Zhai You, Zeng Luan, Xiong Wei. General lens distortion model expressed by image pixel coordinate[J]. Optical Technique, 2015, 41(3):265-269. (in Chinese)
[13]	Liu Yang, Liu Wei, Xu Pengtao, et al. Calibration of lens distortion parameters based on two view geometry of translation motion[J]. Optics and Precision Engineering, 2016, 24(4):922-929. (in Chinese)
[14]	Zou Pengpeng, Zhang Zili, Wang Ping et al. Binocular camera calibration based on Collinear vector and plane homography[J]. Acta Optica Sinica, 2017, 37(11):1-9.

Non-contact measurement and experimental study on complex dynamic motion under high impact

doi: 10.3788/IRLA201847.S117001

Abstract

References

Proportional views

通讯作者: 陈斌, bchen63@163.com

Article Metrics

Related

Proportional views