Miao Xiaofang, Wu Peng, Zhao Baoyin. Optimum design for comb-index core fiber with large mode area[J]. Infrared and Laser Engineering, 2019, 48(9): 918005-0918005(6). doi: 10.3788/IRLA201948.0918005
| Citation:
|
Miao Xiaofang, Wu Peng, Zhao Baoyin. Optimum design for comb-index core fiber with large mode area[J]. Infrared and Laser Engineering, 2019, 48(9): 918005-0918005(6). doi: 10.3788/IRLA201948.0918005
|
Optimum design for comb-index core fiber with large mode area
- 1.
State Key Laboratory of Transient Optics and Photonics,Xi'an Institute of Optics and Precision Mechanics of Chinese Academy of Sciences,Xi'an 710119,China;
- 2.
University of Chinese Academy of Sciences,Beijing 100049,China
- Received Date: 2019-04-11
- Rev Recd Date:
2019-05-21
- Publish Date:
2019-09-25
-
Abstract
The wave-guide structure of the large mode area fiber with a comb-index core was optimized by adding a high refractive index platform in the outer layer of the fiber core, which provided a performance promotion on the parameters of mode field area, mode field distribution and bending resistance. The simulation results show that the optimized refractive index distribution increases the fiber's mode field area by more than 700 m2, and reduces bending loss of the fundamental mode from 6 dB/m to 0.1 dB/m at the same bending radius compared with the original comb-index distribution. Moreover, the mode field distributions including Gauss-like distribution, flattened distribution and hollow distribution, can be obtained by simply modulating the refractive-index parameters of the outermost platform, which may meet the needs of special laser processing industry.
-
References
|
[1]
|
Keck D B, Maurer R D, Schultz P C. On the ultimate lower limit of attenuation in glass optical waveguides [J]. Applied Physics Letters, 1973, 22(7):307-309. |
|
[2]
|
Maurer R D. Glass fibers for optical communication[J]. Proceedings of the IEEE, 1973, 61(4):452-462. |
|
[3]
|
Maurer R. Optical waveguide light source:US, 3808549 [P]. 1974-03-30. |
|
[4]
|
Jauregui C, Limpert J, Tnnermann A. High-power fibre lasers[J]. Nature Photonics, 2013, 7(11):861-867. |
|
[5]
|
Dauson J W. Analysis of the scalability of diffraction-limited fiber lasers and amplifiers to high average power[J]. Opt Exp, 2008, 16(17):13240-13266. |
|
[6]
|
Limpert J. Low-nonlinearity single-transverse-mode ytterbium doped photonic crystal fiber amplifier[J]. Opt Exp, 2004, 12(7):1313-1319. |
|
[7]
|
Kashiwagi M, Saiton K, Takenaga K, et al. Effectively single-mode all-solid photonic bandgap fiber with large effective area and low bending loss for compact high-power all-fiber lasers[J]. Opt Exp, 2012, 20(14): 15061-15070. |
|
[8]
|
Wu Xiaoxiao, Zhang Xiao, Fan Wande, et al. Study on the temperature tuning ultra-high negative dispersion photonic crystal fiber[J]. Acta Photonica Sinica, 2018, 47(5):1-7. |
|
[9]
|
Jin Liang, Xu Li, Zhang He, et al. Optimization of large-mode-area active fiber[J]. Infrared and Laser Engineering, 2014, 43(9):1-6.(in Chinese) |
|
[10]
|
Bai Xiuli, Chen Heming, Zhang Lingfei. Circular photonic crystal fiber supporting orbital angular momentum modes transmission[J]. Infrared and Laser Engineering, 2019, 48(2):0222002.(in Chinese) |
|
[11]
|
Dong Fanlong, Zhao Fangzhou, Ge Tinwu, et al. Optimization of beam quality for all-fiber lasers[J]. Opt Precision Eng, 2014, 22(4):1-6.(in Chinese) |
|
[12]
|
Ke Weiwei, Liu Qinyong, Wang Xiaojun. Fiber with comb-index core designed for high-power fiber lasers [J]. IEEE Journal of Quantum Electronics, 2015, 51(10):1-8. |
|
[13]
|
Wang Xin, Lou Shuqin, Lu Wenliang. Rectangle lattice large mode area photonic crystal fiber for 2滋m compact high-power fiber lasers[J]. IEEE Journal of Selected Topics in Quantum Electronics, 2014, 20(5): 1-6. |
|
[14]
|
Xing Wenxin, Zhang Wei, Shi Lichao, et al. Mid-infrared hollow-core Bragg fiber for trace gas detection [J]. Acta Physica Sinica, 2010, 59(12):8640-8654.(in Chinese) |
-
-
Proportional views
-
DownLoad: