Dynamic ultrasonic wavefield imaging and detection based on digital holographic interferometry

Wang Yan; Ma Hongwei; Wang Xing

doi:10.3788/IRLA201948.1125001

In order to measure and image the ultrasonic wavefield in the whole non-contact field, the dynamic ultrasonic wavefield measurement and imaging method based on digital holographic interference was proposed. Based on the theoretical analysis of ultrasonic wavefield measurement, the principle of ultrasonic wavefield measurement based on digital holographic interferometry was studied. At the same time, the main measuring process and data analysis process for different cross-sectional of dynamic ultrasonic wavefield were studied. The reflection type digital holography system based on pulsed laser was designed, including optical detection subsystem, ultrasonic subsystem and synchronization control subsystem. The experimental results show that the dynamic ultrasonic wavefield can be measured and imaged at different moments in a time series. At the same time, the micro-defect sample is designed and detected by dynamic ultrasonic wavefield measurement. The experimental results show that the dynamic ultrasonic wavefield measurement method and system studied in this paper can effectively identify the minor internal defects in the specimen.

Dynamic ultrasonic wavefield imaging and detection based on digital holographic interferometry

1. School of Mechanical Engineering,Xi'an University of Science and Technology,Xi'an 710054,China

Received Date: 2019-07-05

Rev Recd Date: 2019-08-15

Publish Date: 2019-11-25

Key words:

Abstract: In order to measure and image the ultrasonic wavefield in the whole non-contact field, the dynamic ultrasonic wavefield measurement and imaging method based on digital holographic interference was proposed. Based on the theoretical analysis of ultrasonic wavefield measurement, the principle of ultrasonic wavefield measurement based on digital holographic interferometry was studied. At the same time, the main measuring process and data analysis process for different cross-sectional of dynamic ultrasonic wavefield were studied. The reflection type digital holography system based on pulsed laser was designed, including optical detection subsystem, ultrasonic subsystem and synchronization control subsystem. The experimental results show that the dynamic ultrasonic wavefield can be measured and imaged at different moments in a time series. At the same time, the micro-defect sample is designed and detected by dynamic ultrasonic wavefield measurement. The experimental results show that the dynamic ultrasonic wavefield measurement method and system studied in this paper can effectively identify the minor internal defects in the specimen.

HTML

Reference (14)

[1]	Pelivanov I, Buma T, Xia J, et al. A new fiber-optic non-contact compact laser-ultrasound scanner for fast non-destructive testing and evaluation of aircraft composites[J]. Journal of Applied Physics, 2014, 115(11):113105.
[2]	Pelivanov I, Shtokolov A, Wei C, et al. A 1 kHz a-scan rate pump-probe laser-ultrasound system for robust inspection of composites[J]. IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, 2015, 62(9):1696-1703.
[3]	Hong K M, Kang Y J, Choi I Y, et al. Ultrasonic signal analysis according to laser ultrasound generation position for the detection of delamination in composites[J]. Journal of Mechanical Science and Technology, 2015, 29(12):5217-5222.
[4]	沈中华. 固体中的激光超声[M]. 北京:人民邮电出版社, 2015.
[5]	Zamiri S, Reitinger B, Rodrguez-Rivera M A, et al. Employing 532 nm wavelength in a laser ultrasound interferometer based on photorefractive polymer composites[J]. Open Access Library Journal, 2015, 2(e1247):1-6.
[6]	Zhang Xiaolei, Zhang Xiangchao, Xiao Hong, et al. Speckle removal in phase reconstruction of digital holography for structured surfaces[J]. Infrared and Laser Engineering, 2016, 45(7):0726002. (in Chinese)张晓磊, 张祥朝, 肖虹, 等. 针对结构表面的数字全息相位重构散斑去除方法[J]. 红外与激光工程, 2016, 45(7):0726002.
[7]	Fan Junye, Yin Bochao, Wang Wensheng. Three-dimensional deformation measurement based on double exposure digital holographic technology[J]. Infrared and Laser Engineering, 2014, 43(5):1582-1586. (in Chinese)范俊叶, 尹博超, 王文生. 双曝光数字全息三维变形测试[J]. 红外与激光工程, 2014, 43(5):1582-1586.
[8]	Wang J, Zhao J L, Di J L, et al. Visual measurement of the pulse laser ablation process on liquid surface by using digital holography[J]. Journal of Applied Physics, 2014, 115(17):173106.
[9]	Wang Xiaoling, Chen Daru, Li Haitao, et al. In-line Mach-Zehnder interferometric sensor based on a seven-core optical fiber[J]. IEEE Sensors Journal, 2017, 17(1):100-104.
[10]	Picart P, Leval J, Mounier D, et al. Some opportunities for vibration analysis with time averaging in digital Fresnel holography[J]. Applied Optics, 2005, 44(3):337-43.
[11]	Coppola G, Ferraro P, Iodice M, et al. A digital holographic microscope for complete characterization of microelectromechanical systems[J]. Measurement Science Technology, 2004, 15(3):529.
[12]	Herrez M A, Burton D R, Lalor M J, et al. Fast two-dimensional phase-unwrapping algorithm based on sorting by reliability following a noncontinuous path[J]. Applied Optics, 2002, 41(35):7437-7444.
[13]	Kemper B, Langehanenberg P, Kosmeier S, et al. Digital Holographic Microscopy:Quantitative Phase Imaging and Applications in Live Cell Analysis[M]. New York:Springer, 2013.
[14]	李俊昌. 衍射计算及数字全息[M]. 北京:科学出版社, 2014.

Dynamic ultrasonic wavefield imaging and detection based on digital holographic interferometry

doi: 10.3788/IRLA201948.1125001

Abstract

References

Proportional views

通讯作者: 陈斌, bchen63@163.com

Article Metrics

Related

Proportional views