Volume 43 Issue 4
May  2014
Turn off MathJax
Article Contents

Du Meng, Xing Tingwen, Yuan Jiahu. Application of micromirror array in beam shaping[J]. Infrared and Laser Engineering, 2014, 43(4): 1210-1214.
Citation: Du Meng, Xing Tingwen, Yuan Jiahu. Application of micromirror array in beam shaping[J]. Infrared and Laser Engineering, 2014, 43(4): 1210-1214.

Application of micromirror array in beam shaping

  • Received Date: 2013-08-18
  • Rev Recd Date: 2013-09-20
  • Publish Date: 2014-04-25
  • In the application of laser, the technique of beam shaping was used to modulate the beam to expected intensity distribution. The development of micro electronic and mechanic system provided a solution. The beam shaping was realized by the using of micro mirror array. Based on the idea of randomization, an algorithm was proposed for the application,and the performance under different unit numbers and different noise levels was analyzed so as to present valuable reference in practical application. At the end, a practical optical system model was built and beam trace was performed, and the results under single-mode Gaussian beam and with-noise beam were given. The analysis on results show that beam shaping is achieved effectively using micromirror array under different inputs. And because of the independent addressing property of the micromirror array, the method has flexibility which can satisfy a variety of application requirement.
  • [1]
    [2] Shealy David L, Hoffnagle John A. Laser beam shaping profiles and propagation [J]. Applied Optics, 2006, 45 (21): 5118-5131.
    [3] Shealy David L. Historical perspective of laser beam shaping[C]//SPIE, 2002, 4770: 28-47.
    [4]
    [5]
    [6] Van Wonterghem B M, Salmon J T, Wilcox R W. Beamlet pulse-generation and wavefront-control system [C]//UCRL-LR-105821-95-1: 42-51.
    [7] Schott Paul W, Southwell W H. Reflective optics for irradiance redistribution of laser beams: design [J]. Applied Optics, 1981, 20(9): 1606-1610.
    [8]
    [9] Evans Neal C, Shealy David L. Design and optimization of an irradiance profile-shaping system with a genetic algorithm method[J]. Applied Optics, 1998, 37(22): 5216-5221.
    [10]
    [11] Dirk Hauschild, Oliver Homburg, Thomas Mitra, et al. Optimizing laser beam profiles using micro-lens arrays for efficient material processing_applications to solar cells [C]// SPIE, 2009, 7202: 72020U1-72020U15.
    [12]
    [13] Fan Zengming, Li Zhuo, Qian Lixun. Aspherical lens laser beam shaping system [J]. Infrared and Laser Engineering, 2012, 41(20): 353-357. (in Chinese) 范增明, 李卓, 钱丽勋. 非球面透镜组激光光束整形系统[J]. 红外与激光工程, 2012, 41(20): 353-357.
    [14]
    [15]
    [16] Chen Huaixin, Sui Zhan, Chen Zhenpei, et al. Spatial shaping to laser beam with liquid crystal light modulator[J]. Acta Optica Sinica, 2001, 21(9): 1107-1111. (in Chinese) 陈怀新, 隋展, 陈祯培, 等. 采用液晶空间光调制器进行激 光光束的空间整形[J]. 光学学报, 2001, 21(9): 1107-1111.
    [17] Chen Xiaoxi, Huang Ziqiang, Yang Wenjun. Controllable system and design algorithm for laser beam shaping using optical addressing liquid crystal spatial light modulator [J]. Infrared and Laser Engineering, 2010, 39 (1): 47-50. (in Chinese) 陈晓西, 黄子强, 杨文君. 光寻址液晶空间光调制器用于 激光光束整形的可控系统和设计算法[J]. 红外与激光工 程, 2010, 39(1): 47-50.
    [18]
    [19] Zhao Xiaofeng, Wen Dianzhong. Research and future development on MEMS [J]. Journal of Natural Science of Heilongjiang University, 2002, 19(1): 64-69. (in Chinese) 赵晓峰, 温殿忠. MEMS 研究与发展前景[J]. 黑龙江大学 自然科学学报, 2002, 19(1): 64-69.
    [20]
    [21] Hubert Lakner, Peter Durr, Ulrike, et al. Design and fabrication of micromirror arrays for UV-Lithography [C]// SPIE, 2001, 4561: 255-264.
  • 加载中
通讯作者: 陈斌, bchen63@163.com
  • 1. 

    沈阳化工大学材料科学与工程学院 沈阳 110142

  1. 本站搜索
  2. 百度学术搜索
  3. 万方数据库搜索
  4. CNKI搜索

Article Metrics

Article views(951) PDF downloads(201) Cited by()

Related
Proportional views

Application of micromirror array in beam shaping

  • 1. Institute of Optics and Electronics,Chinese Academy of Sciences,Chengdu 610209,China;
  • 2. University of Chinese Academy of Sciences,Beijing 100049,China

Abstract: In the application of laser, the technique of beam shaping was used to modulate the beam to expected intensity distribution. The development of micro electronic and mechanic system provided a solution. The beam shaping was realized by the using of micro mirror array. Based on the idea of randomization, an algorithm was proposed for the application,and the performance under different unit numbers and different noise levels was analyzed so as to present valuable reference in practical application. At the end, a practical optical system model was built and beam trace was performed, and the results under single-mode Gaussian beam and with-noise beam were given. The analysis on results show that beam shaping is achieved effectively using micromirror array under different inputs. And because of the independent addressing property of the micromirror array, the method has flexibility which can satisfy a variety of application requirement.

Reference (21)

Catalog

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return