Yan Lisong, Wang Xiaokun, Zheng Ligong, Wang Runqiang, Zhang Xuejun. Large-diameter mirror stitching accuracy analysis based on self-test[J]. Infrared and Laser Engineering, 2014, 43(6): 1920-1924.
Citation:
|
Yan Lisong, Wang Xiaokun, Zheng Ligong, Wang Runqiang, Zhang Xuejun. Large-diameter mirror stitching accuracy analysis based on self-test[J]. Infrared and Laser Engineering, 2014, 43(6): 1920-1924.
|
Large-diameter mirror stitching accuracy analysis based on self-test
- 1.
Key Laboratory of Optical System Advanced Manufacturing Technology,Changchun Institute of Optics,Fine Mechanics and Physics,Chinese Academy of Sciences,Changchun 130033,China;
- 2.
University of Chinese Academy of Sciences,Beijing 100049,China;
- 3.
Changchun UP Optotech Co.Ltd,Changchun 130033,China
- Received Date: 2013-10-05
- Rev Recd Date:
2013-11-03
- Publish Date:
2014-06-25
-
Abstract
In order to solve the problem evaluating the stitching accuracy of large-diameter reflecting mirror, a kind of stitching accuracy evaluating method called self-test was proposed in the article, realizing the analysis and evaluation to the stitching accuracy of large-diameter reflector mirror, while providing a method measuring the stitching precision. Self-test was a kind of method testing the accuracy of stitching result with sub-aperture measuring result. In the article, relative accuracy evaluation indexes and their calculation methods were discussed. As a project example, 800 mm plane mirror was splicing measured with a 600 mm interferometer and stitching accuracy was evaluated with the self-test method. It shows that the stitching is accurate and it's reliable and precise to assess stitching accuracy by the way of self-test at the same time.
-
References
[1]
|
Thun en J G, Kwon O Y. Full aperture testing with subaperture test optics[C]//SPIE, 1982, 351: 19-27. |
[2]
|
|
[3]
|
|
[4]
|
Chow W W, Lawrence G N. Method for subaperture testing interferogram reduction[J]. Opt Lett, 1983, 8: 468-470. |
[5]
|
|
[6]
|
Jeson S C, Chow W W, Lawrence G N. Subaperture testing approaches: a comparison[J]. Appl Opt, 1984, 23: 740-745. |
[7]
|
Stuhlinger T W. Subaperture optical testing: experimental verification[C]//SPIE, 1968, 656: 118-127. |
[8]
|
|
[9]
|
|
[10]
|
Chen Shanyong, Li Shengyi, Dai Yifan. Iterative algorithm for subaperture stitching interferometry for general surfaces[J]. J Opt Soc Am A, 2005, 22(9): 1929-1936. |
[11]
|
Chen Shanyong, Li Shengyi, Dai Yifan, et al. Iterative algorithm for subaperture stitching test with spherical interferometers[J]. J Opt Soc Am A, 2006, 23(5):1219-1226. |
[12]
|
|
[13]
|
Wang Q, Chen J B, Zhu R H, et al. A new technique for testing large optical flat[C]//SPIE, 1993, 2003: 389-397. |
[14]
|
|
[15]
|
Peng Su. Absolute measurements of large mirrors[D]. USA: The University of Arizona, 2008. |
-
-
Proportional views
-