Volume 43 Issue 9
Oct.  2014
Turn off MathJax
Article Contents

Bo Shuhui, Chen Zhuo, Xu Guangming, Ren Haohui, Qiu Ling, Liu Xinhou, Zhen Zhen. High-efficient microstrip line polymer electro-optic modulators[J]. Infrared and Laser Engineering, 2014, 43(9): 3066-3069.
Citation: Bo Shuhui, Chen Zhuo, Xu Guangming, Ren Haohui, Qiu Ling, Liu Xinhou, Zhen Zhen. High-efficient microstrip line polymer electro-optic modulators[J]. Infrared and Laser Engineering, 2014, 43(9): 3066-3069.

High-efficient microstrip line polymer electro-optic modulators

  • Received Date: 2014-01-21
  • Rev Recd Date: 2014-02-25
  • Publish Date: 2014-09-25
  • Polymeric electro-optic modulators with microstrip line traveling-wave electrode was designed, fabricated and tested. Assuming that the electro-optic coefficient 33 of the core polymer is 30 pm/V, the performance parameters of the designed modulator is half-wave voltage V=6.70 V. The modulator was fabricated using the second-order nonlinear optical polymer materials which contained the independently synthesized chromophores. The performance of the modulators in direct current (DC), low frequency and microwave property were tested. Using the different poling methods, the low frequency V values at 1.55m were 10.5 V and 4.9 V for corona poling and contact poling, respectively. The electro-optic coefficient of core layer material 33 was thus obtained as 21 pm/V and 45 pm/V. The extinction ratio was measured to be 24 dB. Microwave property of electrode system was also tested with a vector network analyzer, and S parameters reflected this electrode system with low microwave transmission loss and return loss.
  • [1] Yi Xiaosu, Xiao Wen. Integrated optic modulator applied infiber optic gyro [J]. Infrared and Laser Engineering, 2006,35(3): 285-288. (in Chinese)
    [2]
    [3]
    [4] Pereverzev Y V, Gunnerson K N, Prezhdo O V, et al.Guest-host cooperativity in organic materials greatly enhancesthe nonlinear optical response [J]. J Phys Chem C, 2008,112(11): 4355-4363.
    [5] Haller M, Luo J D, Li H X, et al. A novel lattice-hardeningprocess to achieve highly efficient and thermally stablenonlinear optical polymer [J]. Macromolecules, 2004, 37(3):688-690.
    [6]
    [7] Penkov T B J, Huang J P, Sullivan P, et al. Nonlinearpolymer-clad silicon slot waveguide modulator with a halfwave voltage of 0.25V [J]. Appl Phys Lett, 2005, 86 (8):081101.
    [8]
    [9] Enami Y, Mathine D, DeRose C T, et al. Hybrid cross-linkable polymer/sol-gel waveguide modulators with 0.65 Vhalf wave voltage at 1 550 nm [J]. Appl Phys Lett, 2007,91: 093505.
    [10]
    [11]
    [12] Jin D, Chen H, Barklund A, et al. EO polymer modulatorsreliability study [C]//SPIE, 2010, 7599: 75990H.
    [13]
    [14] Zhang B, Wu B Y. Design of optical ridge waveguide inpolymer devices [J]. Journal of OptoelectronicsLaser, 2003,14(5): 445-448. (in Chinese)
    [15] Peng H B, Wu B Y, Song Q, et al. Hybird electrodes usedin polymer electro-optic modulator with ultra-broadband [J].Acta Polymerica Sinica, 2004(3): 345-349.
    [16]
    [17]
    [18] Wu J Y, Bo S H, Liu J L, et al. Synthesis of novelnonlinear optical chromophore to achieve ultrahigh electro-optic activity [J]. Chemical Communications, 2012, 48:9637-9639.
    [19] Chen H, Chen B, Huang D, et al. Broadband electro-opticpolymer modulators with high electo-optic activity and lowpoling induced optical loss [J]. Appl Phys Lett, 2008, 93:043507-1.
  • 加载中
通讯作者: 陈斌, bchen63@163.com
  • 1. 

    沈阳化工大学材料科学与工程学院 沈阳 110142

  1. 本站搜索
  2. 百度学术搜索
  3. 万方数据库搜索
  4. CNKI搜索

Article Metrics

Article views(404) PDF downloads(254) Cited by()

Related
Proportional views

High-efficient microstrip line polymer electro-optic modulators

  • 1. Key Laboratory of Photochemical Conversion and Optoelectronic Materials,Technical Institute of Physics and Chemistry,Chinese Academy of Sciences,Beijing 100190,China

Abstract: Polymeric electro-optic modulators with microstrip line traveling-wave electrode was designed, fabricated and tested. Assuming that the electro-optic coefficient 33 of the core polymer is 30 pm/V, the performance parameters of the designed modulator is half-wave voltage V=6.70 V. The modulator was fabricated using the second-order nonlinear optical polymer materials which contained the independently synthesized chromophores. The performance of the modulators in direct current (DC), low frequency and microwave property were tested. Using the different poling methods, the low frequency V values at 1.55m were 10.5 V and 4.9 V for corona poling and contact poling, respectively. The electro-optic coefficient of core layer material 33 was thus obtained as 21 pm/V and 45 pm/V. The extinction ratio was measured to be 24 dB. Microwave property of electrode system was also tested with a vector network analyzer, and S parameters reflected this electrode system with low microwave transmission loss and return loss.

Reference (19)

Catalog

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return