Volume 43 Issue 10
Nov.  2014
Turn off MathJax
Article Contents

Li Qiang, Wang Zhi, Huang Zejia, Guo Kaili, Liu Lanlan. Multi-parameters SMS optical fiber sensing by employing SCBSS signal processing technique[J]. Infrared and Laser Engineering, 2014, 43(10): 3383-3387.
Citation: Li Qiang, Wang Zhi, Huang Zejia, Guo Kaili, Liu Lanlan. Multi-parameters SMS optical fiber sensing by employing SCBSS signal processing technique[J]. Infrared and Laser Engineering, 2014, 43(10): 3383-3387.

Multi-parameters SMS optical fiber sensing by employing SCBSS signal processing technique

  • Received Date: 2014-02-07
  • Rev Recd Date: 2014-03-03
  • Publish Date: 2014-10-25
  • The technique was presented to simultaneously measure the vibration and strain, vibration and temperature with the Single-mode-Multimode-Single-mode(SMS) fiber structure by employing a kind of digital signal processing technique of Single Channel Blind Source Separation(SCBSS). In the simultaneous measurements of the vibration and stress, the measurement error of vibration frequency was only about 0.17 Hz and the load time of the stress was exactly same as the operation. In the simultaneous measurement of the vibration and temperature, the error of the vibration frequency was less than 0.60 Hz, and the temperature error were less than 7.13% and 8.03% for linear cooling and natural warming, respectively. The SMS optical fiber sensing can measure multi-parameters easily with low cost and high accuracy by employing the SCBSS, which can be used in other optical fiber sensing systems to obtain multi-parameters.
  • [1] Donlagi? D, Zavrnik M. Fiber-optic microbend sensor structure[J]. Optics Letters, 1997, 22(11): 837-839.
    [2]
    [3] Li E, Wang X, Zhang C. Fiber-optic temperature sensor based on interference of selective higher-order modes[J]. Applied Physics Letters, 2006, 89(9): 091119.
    [4]
    [5] Egorov F A, Potapov V T. Optical fiber vibration measuring transducers based on irregular multimode fibers[J]. Technical Physics Letters, 2012, 38(6): 527-530.
    [6]
    [7]
    [8] Rong Q, Qiao X, Guo T, et al. Temperature-calibrated fiber-optic refractometer based on a compact FBG-SMS structure[J]. Chinese Optics Letters, 2012, 10(3): 030604.
    [9] Tripathi S M, Kumar A, Varshney R K, et al. Strain and temperature sensing characteristics of single-mode-multimode-single-mode structures[J]. Journal of Lightwave Technology, 2009, 27(13): 2348-2356.
    [10]
    [11] Wu Q, Semenova Y, Hatta A M, et al. Single-mode-multimode-single-mode fiber structures for simultaneous measurement of strain and temperature[J]. Microwave and Optical Technology Letters, 2011, 53(9): 2181-2185.
    [12]
    [13] Wu Q, Hatta A M, Wang P, et al. Use of a bent single SMS fiber structure for simultaneous measurement of displacement and temperature sensing[J]. Photonics Technology Letters IEEE, 2011, 23(2): 130-132.
    [14]
    [15]
    [16] Huang Zejia, Li Qiang, Xu Yaqin, et al. Research on temperature sensing characteristics based on modular interference of single-mode-multi mode-single-mode fiber[J] Chinese Journal of Lasers, 2013, 40(6): 198-203. (in Chinese) 黄泽铗, 李强, 徐雅芹, 等. 基于单模-多模-单模光纤模间干涉的温度传感特性研究[J]. 中国激光, 2013, 40(6): 198-203.
    [17] Lee J, Lee K J, Yoo S K. Development of a new signal processing algorithm based on independent component analysis for single channel ECG data[C]//EMBS, 2004, 1: 224-226.
    [18]
    [19] Hyvarinen A. Gaussian moments for noisy independent component analysis[J]. Signal Processing Letters, IEEE, 1999, 6(6): 145-147.
  • 加载中
通讯作者: 陈斌, bchen63@163.com
  • 1. 

    沈阳化工大学材料科学与工程学院 沈阳 110142

  1. 本站搜索
  2. 百度学术搜索
  3. 万方数据库搜索
  4. CNKI搜索

Article Metrics

Article views(463) PDF downloads(138) Cited by()

Related
Proportional views

Multi-parameters SMS optical fiber sensing by employing SCBSS signal processing technique

  • 1. Institute of Optical Information,School of Science,Beijing Jiaotong University,Beijing 100044,China;
  • 2. Key Laboratory of Luminescence and Optical Information,Ministry of Education,Beijing 100044,China

Abstract: The technique was presented to simultaneously measure the vibration and strain, vibration and temperature with the Single-mode-Multimode-Single-mode(SMS) fiber structure by employing a kind of digital signal processing technique of Single Channel Blind Source Separation(SCBSS). In the simultaneous measurements of the vibration and stress, the measurement error of vibration frequency was only about 0.17 Hz and the load time of the stress was exactly same as the operation. In the simultaneous measurement of the vibration and temperature, the error of the vibration frequency was less than 0.60 Hz, and the temperature error were less than 7.13% and 8.03% for linear cooling and natural warming, respectively. The SMS optical fiber sensing can measure multi-parameters easily with low cost and high accuracy by employing the SCBSS, which can be used in other optical fiber sensing systems to obtain multi-parameters.

Reference (19)

Catalog

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return