Fan Yujie, Zhou Jianzhong, Chen Hansong, Yin Kaiting. Surface response of copper treated by laser shock processing with microscale[J]. Infrared and Laser Engineering, 2014, 43(12): 3941-3945.
| Citation:
|
Fan Yujie, Zhou Jianzhong, Chen Hansong, Yin Kaiting. Surface response of copper treated by laser shock processing with microscale[J]. Infrared and Laser Engineering, 2014, 43(12): 3941-3945.
|
Surface response of copper treated by laser shock processing with microscale
- 1.
School of Mechanical Engineering,Jiangsu University of Science and Technology,Zhenjiang 212003,China;
- 2.
School of Mechanical Engineering,Jiangsu University,Zhenjiang 212013,China
- Received Date: 2014-04-05
- Rev Recd Date:
2014-05-15
- Publish Date:
2014-12-25
-
Abstract
To investigate the influence of shock wave in laser shock processing with microscale on shocked surface, experimental research of copper with different energy and shock number was carried out in the paper, and surface topography was measured. The results show that plastic deformation induced by shock wave with microscale is the interactive effect of pressure in both axial and radial direction. Pressure in axial direction plays a dominant role nearby the centre of laser beam, the amount of the plasticity deformation increases with increament of laser energy and shock number; Pressure in radial direction plays a leading role nearby the periphery, region of plastic deformation in radial direction increases with increament of laser energy, and spot edge is significantly salient when laser energy is over 70 mJ; Plastic deformation in radial direction increases first and then decreases with increasement of shock number, bulging deformation at spot edge is serious when shock number is over 3 times.
-
References
|
[1]
|
|
|
[2]
|
Chahardehi, F P Brennan, A Steuwer. The effect of residual stresses arising from laser shock peening on fatigue crack growth [J]. Engineering Fracture Mechanics, 2010, 77: 2033-2039. |
|
[3]
|
|
|
[4]
|
Linfa Peng, Xinmin Lai, Hyejin Lee, et al. Friction behavior modeling and analysis in micro/meso scale metal forming process[J]. Materials and Design, 2010, 31(2): 1953-1961. |
|
[5]
|
Kimberley J, Chasiotis I, Lambros J. Failure of microelectrom-echanical systems subjected to impulse loads [J]. International Journal of Solids and Structures, 2008, 45: 497-512. |
|
[6]
|
|
|
[7]
|
|
|
[8]
|
Fan Yujie, Zhou Jianzhong, Huang Shu, et al. Research on mechanical response of copper treated by micro laser shock peening using nanoindentation technique [J]. Chinese Journal of Lasers, 2011, 38(6): 603026-1-5. (in Chinese) |
|
[9]
|
|
|
[10]
|
Sinia Vukelic, Jeffrey W Kysar, Y Lawrence Yao. Grain boundary response of aluminum bicrystal under micro scale laser shock peening [J]. International Journal of Solids and Structures, 2009, 46(18-19): 3323-3335. |
|
[11]
|
|
|
[12]
|
Chen H, Kysar J W, Yao Y L. Characterization of plastic deformation induced by micro-scale laser shock peening [J]. Journal of Applied Mechanics, 2004, 71: 713-723. |
|
[13]
|
|
|
[14]
|
Zhang W, Yao Y L. Microscale laser shock processing: modeling, testing and microstructure characterization [J]. Journal of Manufacturing Processes, 2002, 3(2):128-143. |
|
[15]
|
|
|
[16]
|
Chen Xiao. Studies on mechanisms of the interaction between high-power laser and matter in water [D]. Nanjing: Nanjing University of Science and Technology, 2004. (in Chinese) |
|
[17]
|
|
|
[18]
|
Fan Y J, Zhou J Z, Huang S, et al. Study on 2-D shock wave pressure model in micro scale laser shock peening [J]. Rev Adv Mater Sci, 2013, 33: 111-118. |
|
[19]
|
Zhang Wenwu, Yao Y. Lawrence. Micro scale laser shock processing of metallic components [J]. Journal of Manufacturing Science and Engineering, 2002, 124: 369-378. |
-
-
Proportional views
-
DownLoad: