Lin Bin, Wang Bo, Liu Pengfei, Zhang Xiaofeng. Hydrodynamic grinding theory of fixed abrasive processing[J]. Infrared and Laser Engineering, 2014, 43(12): 4006-4012.
| Citation:
|
Lin Bin, Wang Bo, Liu Pengfei, Zhang Xiaofeng. Hydrodynamic grinding theory of fixed abrasive processing[J]. Infrared and Laser Engineering, 2014, 43(12): 4006-4012.
|
Hydrodynamic grinding theory of fixed abrasive processing
- 1.
Key Laboratory of Advanced Ceramics and Machining Technology,Ministry of Education,Tianjin University,Tianjin 300072,China
- Received Date: 2014-04-12
- Rev Recd Date:
2014-05-11
- Publish Date:
2014-12-25
-
Abstract
Mixed contact fixed abrasive processing was proposed in this paper for controlling the grinding depth of a definitive tool and decreasing the tool switches frequency for the first time. Thus the machining efficiency can be significantly improved. The transient isotherm hydrodynamic lubrication equations of the liquid membrane between the tool and workpiece were established. Then explicit difference algorithm was adopted. The numerical simulation was conducted to analyze the hydrodynamic pressure and its distribution. The feasibility of controlling the grinding depth by the liquid membrane's hydrodynamic pressure was confirmed by the results. Because the hydrodynamic pressure increases with decreasing maximum grinding depth and its distribution becomes flat. The hydrodynamic pressure obviously increases with the inlet pressure, while its distribution becomes uneven. The influence of the rotational speed is inconspicuous, because of the grinding tool surface topography and the processing quality demand.
-
References
|
[1]
|
|
|
[2]
|
Wang Zhenglun. Laser ignition and other ignition mode analysis in the artillery [J]. Infrared and Laser Engineering, 2008, 37(S): 422-425. (in Chinese) 王争论. 激光点火及其他点火方式在火炮分析中的研究[J]. 红外与激光工程, 2008, 37(S): 422-425. |
|
[3]
|
|
|
[4]
|
Zhang Jun. Semiconductor laser beam technology and application[J]. Infrared and Laser Engineering, 2012, 41(12): 3193-3197. (in Chinese) 张俊. 半导体激光合束技术及其应用[J]. 红外与激光工程, 2012, 41(12): 3193-3197. |
|
[5]
|
Wang Xu. Evaluation of the RB-SiC mirror surface fabricated with the fixed abrasive technology [J]. Infrared and Laser Engineering, 2012, 41(9): 2474-2479. (in Chinese) 王旭. 固着磨料工艺加工碳化硅反射镜表面质量研究[J]. 红外与激光工程, 2012, 41(9): 2474-2479. |
|
[6]
|
|
|
[7]
|
|
|
[8]
|
Sundararajan S, Thakurta D G, Schwendeman D W, et al. Two-dimensional wafer-scale chemical-mechanical planarization models based on lubrication theory and mass transport [J]. Journal of the Electrochemical Society, 1999, 146(2): 761-766. |
|
[9]
|
|
|
[10]
|
Park S S, Cho C H, Ahn Y. Hydrodynamic analysis of chemical mechanical polishing process [J]. Tribology International, 2000, 33(10): 723-730. |
|
[11]
|
|
|
[12]
|
Cho C H, Park S S, Ahn Y. Three-dimensional wafer scale hydrodynamic modeling for chemical mechanical polishing[J]. Thin Solid Films, 2001, 389(1-2): 254-260. |
|
[13]
|
|
|
[14]
|
Kim A T, Seok J, Tichy J A, et al. A multiscale elastohydrodynamic contact model for CMP [J]. Journal of the Electrochemical Society, 2003, 150(9): 570-576. |
|
[15]
|
Koshy P, Jain V K, Lal G K. Stochastic simulation approach to modelling diamond wheel topography [J]. International Journal of Machine Tools and Manufacture, 1997, 37 (6): 751-761. |
|
[16]
|
|
|
[17]
|
Chen X, Rowe W B. Analysis and simulation of the grinding process. Part I: generation of the grinding wheel surface[J]. International Journal of Machine Tools and Manufacture, 1996, 36 (8): 871-882. |
|
[18]
|
|
|
[19]
|
Syoji K, Zhou L B, Matsui S. Studies on truing and dressing of diamond wheels [J]. Bulletin of the Japan Society for Precision Engineering, 1990, 24(2): 124-129. |
-
-
Proportional views
-
DownLoad: