Tao Huirong, Zhang Fumin, Qu Xinghua. Experimental study of backscattering signals from rough targets in non-cooperative laser measurement system[J]. Infrared and Laser Engineering, 2014, 43(S1): 95-100.
Citation:
|
Tao Huirong, Zhang Fumin, Qu Xinghua. Experimental study of backscattering signals from rough targets in non-cooperative laser measurement system[J]. Infrared and Laser Engineering, 2014, 43(S1): 95-100.
|
Experimental study of backscattering signals from rough targets in non-cooperative laser measurement system
- 1.
State Key Laboratory of Precision Measuring Technology and Instruments,Tianjin University,Tianjin 300072,China
- Received Date: 2014-10-10
- Rev Recd Date:
2014-11-15
- Publish Date:
2015-01-25
-
Abstract
The measurement system of the surface backscattering characteristic was designed and setup in this paper. The send and receive in system was coaxial inhemisphere space. The laser is 1 550 nm linear polarization and narrow linewidth. The backscattering characteristic of grinding, vertical milling and plain milling samples with different surface microstructure was measured at different incidence angles from 0 to 60. The effect of the incident light polarization direction, azimuth angle, incidence angle and the surface microstructure on the backscattering was discussed. The reasons of these effects and the change of backscattering characteristic were analyzed. It was found that the incident light polarization direction, azimuth angle, incidence angle and the surface microstructure had regularity effect on the backscattering. They had both the common law, also had individual character. Surface microstructure determined the backscattering energy distribution and polarization characteristic with the change of incidence azimuth and angles. This result shall provide the reference value to the research of cooperation target measurement field and other surface measuring field.
-
References
[1]
|
|
[2]
|
Gao Feng, Guo Weizhong, Song Qingyu, et al. Current development of heavy-duty manufacturing equipments[J]. Jounal of Machanical Engineering, 2010, 46(19): 92-107. (in Chinese) 高峰, 郭为忠, 宋清玉, 等. 重型制造装备国内外研究与发展[J]. 机械工程学报, 2010, 46(19): 92-107. |
[3]
|
Kakuma S, Katase Y. Frequency scanning interferometry immune to length drift using a pair of vertical-cavity surface-emitting laser diodes[J]. Optical Review, 2012, 19(6): 376-380. |
[4]
|
|
[5]
|
Deng Chen, Zhao Jiguang, Du Xiaoping, et al. Transmitting power of FM/CW lidar[J]. Infrared and Laser Engineering, 2009, 38(2): 304-307. (in Chinese) 邓陈, 赵继广, 杜小平, 等. FM/CW 激光雷达发射功率的研究[J]. 红外与激光工程, 2009, 38(2): 304-307. |
[6]
|
|
[7]
|
Tang Kun, Zou Jiwei, Jiang Tao, et al. IR polarization properties of a target and its background[J]. Infrared and Laser Engineering, 2007, 36(5): 611-614. (in Chinese) 唐坤, 邹继伟, 姜涛, 等. 目标与背景的红外偏振特性研究[J]. 红外与激光工程, 2007, 36(5): 611-614. |
[8]
|
|
[9]
|
|
[10]
|
Wang Mingjun, Wu Zhensen, Li Yingle, et al. Computation and analysis on the laser scattering echo energy from whole dimension target under complex environment[J]. Infrared and Laser Engineering, 2006, 35(1): 66-69. (in Chinese) 王明军, 吴振森, 李应乐, 等. 复杂背景下大尺寸目标激光散射回波能量的计算[J]. 红外与激光工程, 2006, 35(1): 66-69. |
[11]
|
|
[12]
|
Kotlyar V V, Stafeev S S, Liu Y, et al. Analysis of the shape of a subwavelength focal spot for the linearly polarized light[J]. Applied optics, 2013, 52(3): 330-339. |
[13]
|
Clark J, Robson S. Accuracy of measurements made with a Cyrax 2500 laser scanner against surfaces of known colour[J]. Survey Review, 2004, 37(294): 626-638. |
[14]
|
|
[15]
|
Renau J, Collinson J A. Measurements of electromagnetic back-scattering from known, rough surfaces*[J]. Bell System Technical Journal, 1965, 44(10): 2203-2226. |
-
-
Proportional views
-