Study on join method of reaction bonded silicon carbide green body

Zhang Ge

The join slurry is composed by silicon carbide(SiC) powder, phenolic resin and carbon black. Joining SiC green body after deairing, and then the reaction bonded SiC(RBSiC) joining mirror blank was prepared by reaction sintering. The relationship of the slurry formula and the microstructure of weld were discussed. The bending strength and the coefficient of thermal expansion of joining RBSiC ceramic were tested. The research shows that PEG200 and PVP can make carbon black dispersing homogeneous in the join slurry, and there is no residual carbon black in the weld after reaction sintering, so the microstructure of RBSiC ceramic is no different from the weld. The blending strength of joining green body and joining RBSiC ceramic are 24.9 MPa and 322.9 MP arespectively, and the fracture occurred in the base material. The CTE of base and weld material is only 0.011 4 ppm during -100-400 ℃.

1. Key Laboratory of Optical System Advanced Manufacture Technology,Changchun Institute of Optics,Fine Mechanics and Physics,Chinese Academy of Sciences,Changchun 130033,China

Received Date: 2014-10-05

Rev Recd Date: 2014-12-03

Publish Date: 2015-01-25

Key words:

Abstract: The join slurry is composed by silicon carbide(SiC) powder, phenolic resin and carbon black. Joining SiC green body after deairing, and then the reaction bonded SiC(RBSiC) joining mirror blank was prepared by reaction sintering. The relationship of the slurry formula and the microstructure of weld were discussed. The bending strength and the coefficient of thermal expansion of joining RBSiC ceramic were tested. The research shows that PEG200 and PVP can make carbon black dispersing homogeneous in the join slurry, and there is no residual carbon black in the weld after reaction sintering, so the microstructure of RBSiC ceramic is no different from the weld. The blending strength of joining green body and joining RBSiC ceramic are 24.9 MPa and 322.9 MP arespectively, and the fracture occurred in the base material. The CTE of base and weld material is only 0.011 4 ppm during -100-400 ℃.

HTML

Reference (12)

[1]	Mark A Ealey, Gerald O Weaver. Development history and trends for reaction bonded silicon carbide mirror [C] //SPIE, 1996, 2856: 66-72.
[2]
[3]	Zhang Ge, Feng Xiaoguo. Development of silicon carbide mirrors [J]. Optics and Precision Engineering, 2013, 21: 38-44. (in Chinese) 张舸, 冯晓国. 空间用碳化硅反射镜研制进展[J]. 光学精密工程, 2013, 21: 38-44.
[4]
[5]	Liang Kai, Xiong Lasheng. The research development of advanced structural ceramics material and soldering joining technology[J]. Modern Welding, 2006, 8: 11-14. (in Chinese) 梁凯, 熊腊森. 先进结构陶瓷材料及其钎焊连接技术的研究进展[J]. 现代焊接, 2006, 8: 11-14.
[6]
[7]
[8]	Hong Y D, Shu J L, Ying Y T, et al. Joing of SiC ceramic based materials with ternary carbide Ti3SiC2[J]. Materials Science and Engineering B, 2011, 176: 60-64.
[9]
[10]	Lin Guobiao, Huang Jihua, Mao Jianying, et al. The research development of SiC joining[C] //The conference of 11th National Welding, 2005: 1-5. (in Chinese) 林国标, 黄继华, 毛建英, 等. SiC陶瓷连接的研究进展[C] //第十一次全国焊接会议论文集, 2005: 1-5.
[11]
[12]	Singh M. Microstructure and mechanical properties of reaction-formed joints in reaction-bonded silicon carbide ceramics[J]. Journal of Materials Science, 1998, 33: 5781-5787.

Study on join method of reaction bonded silicon carbide green body

Abstract

References

Proportional views

通讯作者: 陈斌, bchen63@163.com

Article Metrics

Related

Proportional views