Volume 41 Issue 1
Mar.  2012
Turn off MathJax
Article Contents

Zhao Xinyu, Qiao Yanfeng, Guo Ruhai, Shao Shuai, Wang Siwen, Sun Tao. Method of near- and far-field measurement and application for mid-infrared laser[J]. Infrared and Laser Engineering, 2012, 41(1): 49-52.
Citation: Zhao Xinyu, Qiao Yanfeng, Guo Ruhai, Shao Shuai, Wang Siwen, Sun Tao. Method of near- and far-field measurement and application for mid-infrared laser[J]. Infrared and Laser Engineering, 2012, 41(1): 49-52.

Method of near- and far-field measurement and application for mid-infrared laser

  • Publish Date: 2012-01-25
  • The high-repetition 3-5 m mid-infrared laser has gain a lot of attention for its potential applications in civil and military. However, there are many technical difficulties to generate this band laser and it is invisible. Therefore, there are rarely such reports about methods of near- and far-field measurements for the lasers. In this article, the near-field measuring for the parameters of laser was conducted at first. Then, the absolute and relative energy density distribution were obtained by the point detector sampling. At last, the infrared imaging system was used to record the image of laser spot received in a far-field screen in the distance of 180 m. The relative energy density distribution could also be simulated by theory of Fresnel diffraction integral of circular aperture. The theoretical and experimental results show that the wavelength of this laser is about 3.9 m with the properties of high average power, high repetition and stability about 10%. The far-field theoretical results show that the energy density distribution is quasi-Gaussian distribution and agrees well with the average energy density of 6.367nJ/cm2,which is smaller than the evaluation of empirical formula by the factor of 1.3. This work will definitely be helpful to measure the parameters of pulsed high-repetition mid-infrared laser and judge the disturbing threshold for the detectors in more far distance.
  • [1]
    [2] Guo Ruhai, Li Dianjun. Experiments of second harmonic generation output in pulsed TEA CO2 laser [C]//SPIE, 2010, 7843: 78430E-1-78430E-5.
    [3] Tittel F K, Dirk R, Alan F. Mid-infrared laser applications in spectroscopy [J]. Topics Appl Phys, 2003, 89: 445-516.
    [4]
    [5]
    [6] Guo Ruhai, Shi Long, Wang Siwen, et al. Development review of HF/DF chemical lasers[J]. OME Information, 2010, 27(3): 30-35. (in Chinese)
    [7] 郭汝海, 施龙, 王思雯, 等. HF/DF化学激光器的研究进展[J]. 光机电信息, 2010, 27(3): 30-35.
    [8] Haakestad M W, Arisholm G, Lippert E. High-pulse-energy mid-infrared laser source based on optical parametric amplification in ZnGeP2[J]. Optics Express, 2008, 16(18): 14263-14273.
    [9]
    [10] Jiang Hailin, Bian Jintian, Nie Jinsong, et al. Theoretical investigation on a method generating 4.3 m laser based on the tandem optical parametric oscillator [J]. Infrared and Laser Engineering, 2011, 40(2): 210-219. (in Chinese)
    [11] David H T. A consideration of the requirements for laser devices used in countermeasure applications[C]// SPIE, 2007, 6451: 64511Q-1-64511Q-14.
    [12]
    [13]
    [14] Zhang Yonggang, Gu Yi, Li Yaoyao et al. Mid-infrared semiconductor light sources, detectors and its applications [J]. Infrared and Laser Engineering, 2011, 40(10): 1846-1850. (in Chinese)
    [15] 姜海林, 卞进田, 聂劲松, 等. 利用双光学参量振荡器结构输出4.3 m激光方案[J]. 红外与激光工程, 2011, 40(2): 210-219.
    [16] Zhang Mingping, Zhang Jingxian, Li Yudan. Night Vision System [M]. Beijing: Beijing Institute of Technology Press, 1993: 152-234. (in Chinese)
    [17] Zhou Jianmin, Yin Hongyan, Guo Jin. Research on evaluation method of remote fluence distribution of laser irradiation[J]. Electro-Optic Technology Application, 2006, 21(6): 62-64. (in Chinese)
    [18]
    [19]
    [20]
    [21] 张永刚, 顾溢, 李耀耀, 等. 中红外半导体光源和探测器件及其应用 [J]. 红外与激光工程, 2011, 40(10): 1846-1850.
    [22]
    [23]
    [24] 张鸣平, 张敬贤, 李玉丹. 夜视系统 [M]. 北京: 北京理工大学出版社, 1993: 152-234.
    [25]
    [26]
    [27] 周建民, 尹洪妍, 郭劲. 激光辐照远场能流分布估算方法研究 [J]. 光电技术应用, 2006, 21(6): 62-64.
  • 加载中
通讯作者: 陈斌, bchen63@163.com
  • 1. 

    沈阳化工大学材料科学与工程学院 沈阳 110142

  1. 本站搜索
  2. 百度学术搜索
  3. 万方数据库搜索
  4. CNKI搜索

Article Metrics

Article views(395) PDF downloads(120) Cited by()

Related
Proportional views

Method of near- and far-field measurement and application for mid-infrared laser

  • 1. Changchun Institute of Optics,Fine Mechanics and Physics,Chinese Academy of Sciences,Changchun 130033,China;
  • 2. Graduate University of the Chinese Academy of Sciences,Beijing 100049,China

Abstract: The high-repetition 3-5 m mid-infrared laser has gain a lot of attention for its potential applications in civil and military. However, there are many technical difficulties to generate this band laser and it is invisible. Therefore, there are rarely such reports about methods of near- and far-field measurements for the lasers. In this article, the near-field measuring for the parameters of laser was conducted at first. Then, the absolute and relative energy density distribution were obtained by the point detector sampling. At last, the infrared imaging system was used to record the image of laser spot received in a far-field screen in the distance of 180 m. The relative energy density distribution could also be simulated by theory of Fresnel diffraction integral of circular aperture. The theoretical and experimental results show that the wavelength of this laser is about 3.9 m with the properties of high average power, high repetition and stability about 10%. The far-field theoretical results show that the energy density distribution is quasi-Gaussian distribution and agrees well with the average energy density of 6.367nJ/cm2,which is smaller than the evaluation of empirical formula by the factor of 1.3. This work will definitely be helpful to measure the parameters of pulsed high-repetition mid-infrared laser and judge the disturbing threshold for the detectors in more far distance.

Reference (27)

Catalog

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return