Volume 44 Issue 3
Apr.  2015
Turn off MathJax
Article Contents
Article Navigation >  Infrared and Laser Engineering  > 2015  >  44(3): 964-968

Ma Xiurong, Wang Xiayang. Spectral hole depth dependence on optical length in Tm3+ :YAG within cryogenic temperature range[J]. Infrared and Laser Engineering, 2015, 44(3): 964-968.
Citation: Ma Xiurong, Wang Xiayang. Spectral hole depth dependence on optical length in Tm3+ :YAG within cryogenic temperature range[J]. Infrared and Laser Engineering, 2015, 44(3): 964-968.
shu

Spectral hole depth dependence on optical length in Tm3+ :YAG within cryogenic temperature range

  • 1.

    Engineering Research Center on Communication Devices Ministry of Education,School of Computer and Communication Engineering,Tianjin University of Technology,Tianjin 300384,China;

  • 2.

    Tianjin Key Laboratory of Film Electronic and Communication Device,School of Electronic Information Engineering,Tianjin University of Technology,Tianjin 300384,China

  • Received Date: 2014-07-11
  • Rev Recd Date: 2014-08-16
  • Publish Date: 2015-03-25
  • Spectral hole depth dependence on optical length in Tm3+ :YAG was theoretically and experimentally investigated. A novel model was proposed to analyze the spectral hole depth dependence on optical length. With the proposed model, the spectral hole depth dependence on optical length had been derived theoretically. According to the theoretic result, when temperature was higher than 4K, the maximum spectral hole depth could be found by choosing the optimum optical length. The theoretical analysis were experimentally tested using spectral hole burning in Tm3+:YAG for a couple of configurations and sizes of the beams.
  • [1]
    [2] Cole Z, Bottger T, Mohan R K, et al. Coherent integration of 0.5 GHz spectral holograms at 1536 nm using dynamic biphase codes[J]. Applied Physics Letters, 2002, 81(19): 3525-3527.
    [3] Gorju G, Crozatier V, Lorger I, et al. 10-GHz bandwidth RF spectral analyzer with MHz resolution based on spectral hole burning in Tm3+:YAG[J]. IEEE Photonics Technology Letters, 2005, 17(11): 2385-2387.
    [4]
    [5] Schlottau F, Colice M, Wagner K H, et al. Spectral hole burning for wideband, high-resolution radio-frequency spectrum analysis[J]. Optics Letters, 2005, 30(22): 3003-3005.
    [6]
    [7]
    [8] Song Minqing, Hou Shanglin, Zhang Baoxia, et al. Investigation on slow light of photonic crystal fiber Bragg gratings[J]. Infrared and Laser Engineering, 2013, 42(6): 1547-1552. (in Chinese) 宋民青, 侯尚林, 张保侠, 等. 光子晶体光纤布拉格光栅慢光的研究[J]. 红外与激光工程, 2013, 42(6): 1547-1552.
    [9]
    [10] Lu Hui, Zhang Lijun, Zheng Zhanqi, et al. Time-delay and phase-delay methods for slow light measurement in photonic crystal waveguide[J]. Infrared and Laser Engineering, 2012, 41(2): 347-352. (in Chinese) 鲁辉, 张立军, 郑占旗, 等. 用于光子晶体波导慢光测试的时间和相位延迟方法[J]. 红外与激光工程, 2012, 41(2): 347-352.
    [11] Qu Ronghui, Cai Haiwen. Narrow linewidth lasers with high stability[J]. Infrared and Laser Engineering, 2009, 38 (6): 1033-1038. (in Chinese) 瞿荣辉, 蔡海文. 高稳定度窄线宽激光器的研究[J]. 红外与激光工程, 2009, 38(6): 1033-1038.
    [12]
    [13]
    [14] Colice M, Schlottau F, Wagner K H. Broadband radio-frequency spectrum analysis in spectral-hole-burning media[J]. Applied Optics, 2006, 45(25): 6393-6408.
    [15] Ivan Lorger, Loc Menagr, Vinvent Lavielle, et al. Demonstration of a radio-frequency spectrum analyzer based on spectral hole burning[J]. Journal of Modern Optics,2002, 49: 2459-2475.
    [16]
    [17] Lei C, Ma Xiurong, Wei W, et al. Characterization of spectral hole depth in Tm3+:YAG within the cryogenic temperature range[J]. Chinese Physics B, 2013, 22(6): 064213.
    [18]
    [19]
    [20] Colice M, Schlottau F, Wagner K, et al. RF spectrum analysis in spectral hole burning media[C]// Optical Science and Technology, the SPIE 49th Annual Meeting, International Society for Optics and Photonics, 2004: 132-139.
    [21]
    [22] Schlottau F, Colice M, Wagner K H, et al. Spectral hole burning for wideband, high-resolution radio-frequency spectrum analysis[J]. Optics Letters, 2005, 30(22): 3003-3005.
    [23] Chang T, Tian M, Mohan R K, et al. Recovery of spectral features readout with frequency-chirped laser fields[J]. Optics Letters, 2005, 30(10): 1129-1131.
  • 加载中
通讯作者: 陈斌, bchen63@163.com
  • 1. 

    沈阳化工大学材料科学与工程学院 沈阳 110142

  1. 本站搜索
  2. 百度学术搜索
  3. 万方数据库搜索
  4. CNKI搜索
Get Citation
PDF
XML

Article Metrics

Article views(293) PDF downloads(245) Cited by()

Related
Proportional views

Spectral hole depth dependence on optical length in Tm3+ :YAG within cryogenic temperature range

  • 1. Engineering Research Center on Communication Devices Ministry of Education,School of Computer and Communication Engineering,Tianjin University of Technology,Tianjin 300384,China;
  • 2. Tianjin Key Laboratory of Film Electronic and Communication Device,School of Electronic Information Engineering,Tianjin University of Technology,Tianjin 300384,China
  • Received Date: 2014-07-11
  • Rev Recd Date: 2014-08-16
  • Publish Date: 2015-03-25

Abstract: Spectral hole depth dependence on optical length in Tm3+ :YAG was theoretically and experimentally investigated. A novel model was proposed to analyze the spectral hole depth dependence on optical length. With the proposed model, the spectral hole depth dependence on optical length had been derived theoretically. According to the theoretic result, when temperature was higher than 4K, the maximum spectral hole depth could be found by choosing the optimum optical length. The theoretical analysis were experimentally tested using spectral hole burning in Tm3+:YAG for a couple of configurations and sizes of the beams.

    HTML

Reference (23)

Catalog

    版权所有 © 2019 《红外与激光工程》编辑部｜ Address: 58 Zhonghuan West Road, Tianjin Airport Economic Zone｜ Post Code: 300308

    津ICP备19007885号-1

    Supported by: Beijing Renhe Information Technology Co. Ltd  

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return