Hao Huimin, Zhang Yong, Quan Long. Electrode separation optimization of triple-electrode carbon nanotube sensor[J]. Infrared and Laser Engineering, 2015, 44(10): 3061-3065.
| Citation:
|
Hao Huimin, Zhang Yong, Quan Long. Electrode separation optimization of triple-electrode carbon nanotube sensor[J]. Infrared and Laser Engineering, 2015, 44(10): 3061-3065.
|
Electrode separation optimization of triple-electrode carbon nanotube sensor
- 1.
Key Laboratory of Advanced Transducers and Intelligent Control Systems,Ministry of Education China,Taiyuan University of Technology,Taiyuan 030024,China;
- 2.
State Key Laboratory of Electrical Insulation and Power Equipment,Xi'an Jiaotong University,Xi'an 710049,China
- Received Date: 2015-02-20
- Rev Recd Date:
2015-03-21
- Publish Date:
2015-10-25
-
Abstract
For triple-electrode carbon nanotube sensor, the electrode separation between electrodes is one of the key factors to influence the accuracy of detection. It is very difficult to decide the sensors' electrode separations when detecting the multi-component gas mixture using sensor array. A electrode separation optimization method for triple-electrode carbon nanotube gas sensor was presented. The method is based on particle swarm optimization(PSO) and includes following procedures: designing electrode separation, constructing sensor array using multi-sensor with different electrode separations, building data base including electrode separation and detection ionic current, creating quantitative analysis model of mixed gas, and optimizing electrode separation. The NO and SO2 gas mixtures were detected by multi-group sensor array, which were composed of three carbon nanotube sensors with different electrode separations. The electrode separations of three sensors was optimized using above-mentioned method. The experimental results show that the proposed method is able to select the optimal distances between electrodes effectively and the sensor with optimized electrode separation achieve higher detection accuracy.
-
References
|
[1]
|
|
|
[2]
|
Zhang Y, Liu J H, Liu W H, et al. Study of gas sensor with carbon nanotube film on the substrate of porous silicon[C]//14th Intl Vac Microelectron Conf, 2001:13-14. |
|
[3]
|
|
|
[4]
|
Zhang Y, Liu J H, Li X, et al. Study of improving identification accuracy of carbon nanotube film cathode gas sensor[J]. Sens Actuators, A, 2005, 125(15):15-24. |
|
[5]
|
|
|
[6]
|
Kermany A R, Mohamed N M, Singh B S M. Characterization of aligned MWCNT's array as the sensing element for ionization gas sensor[J]. J Appl Sci, 2011, 11:1243-1248. |
|
[7]
|
|
|
[8]
|
Cai S B, Zhe M D, Zhang Y. Flammable and noxious gas sensing using a microtripolar electrode sensor with diameter and chirality sorted single-walled carbon nanotubes[J]. J Micromech Microeng, 2013, 23:085022. |
|
[9]
|
|
|
[10]
|
Zhang Y, Li S T, Zhang J Y, et al. High-performance gas sensors with temperature measurement[J]. Scientific Reports, 2013, 3:1267-1273. |
|
[11]
|
|
|
[12]
|
Zhang Y, Wang J, Wang Y H, et al. A Carbon nanotube film gas sensor and fabrication method:China, 201110037965.4[P]. 2012. |
|
[13]
|
|
|
[14]
|
Zhang Y, Zhang J Y, Song X H, et al. Carbon nanotube film triple-electrode sensor array and detection method of gas mixture, China:201110039018.9[P]. 2012. |
|
[15]
|
|
|
[16]
|
Li X, Liu J H, Dou J Y, et al. Improvement of purity and field emission character of carbon nanotubes film by optimizing the density of the catalyst solution[J]. Journal of Xi'an Jiaotong Univ, 2002, 36:1041-1044. |
|
[17]
|
Stone M. Cross-validatory choice and assessment of statistical predictions[J]. J Royal Stat Soc Series B(Methodological), 1974, 36:111-147. |
|
[18]
|
|
|
[19]
|
Kennedy J, Eberhart R C. Particle swarm optimization[C]//IEEE International Conference on Neural Networks, 1995:1942-1948. |
-
-
Proportional views
-
DownLoad: