Zhang Zhenzhen, Yang Ailing, Zhao Yang, Nan Gangyang. Laser ultrasonic three-dimensional imaging of aluminum block with artificial defects[J]. Infrared and Laser Engineering, 2015, 44(S1): 57-62.
| Citation:
|
Zhang Zhenzhen, Yang Ailing, Zhao Yang, Nan Gangyang. Laser ultrasonic three-dimensional imaging of aluminum block with artificial defects[J]. Infrared and Laser Engineering, 2015, 44(S1): 57-62.
|
Laser ultrasonic three-dimensional imaging of aluminum block with artificial defects
- 1.
NDT Lab,Laser Institute of Shandong Academy of Sciences,Jinan 250103,China;
- 2.
Department of Physics,Ocean University of China,Qingdao 266100,China
- Received Date: 2015-10-05
- Rev Recd Date:
2015-12-03
- Publish Date:
2016-01-25
-
Abstract
Laser ultrasonic(LU) three-dimensional (3D) imaging system combining wavelet threshold method(WTM) was presented, in which a laser beam was used to irradiate the aluminum(Al) block as a scanner and an interferometer as a receiver. Ultrasonic signals saved were processed by wavelet threshold for reducing noise. And data processed constitutes a 3D matrix in the scanning sequence, which could be sliced along the time axis to yield spreadsheets and be superposed in a 3D space using the MATLAB procedure. Then, artificial defects can be modelled and visualized. Ultrasonic signals were incorporated with algorithm to successfully reconstruct the 3D object model, which could contain the defect information, indicating that laser ultrasonic 3D imaging is more intuitive and effective than the traditional laser ultrasonic method of identifying defects.
-
References
|
[1]
|
|
|
[2]
|
Byeongjin Park, Yun-Kyu An, Hoon Sohn. Visualization of hidden delamination and debonding in composites through noncontact laser ultrasonic scanning[J]. Composites Science and Technology, 2014, 100: 10-18. |
|
[3]
|
|
|
[4]
|
Song Yanxing, Wang Jing. Influence of laser parameters and laser ultrasonic detection method on ultrasonic signals[J]. Infrared and Laser Engineering, 2014, 43(5): 1433-1437. |
|
[5]
|
Sanderson R M, Shen Y C. Measurement of residual stress using laser-generated ultrasound[J]. International Journal of Pressure Vessels and Piping, 2010, 87: 762-765. |
|
[6]
|
|
|
[7]
|
Irene Arias, Jan D Achenbach. A model for the ultrasonic detection of surface-breaking cracks by the scanning laser source technique[J]. Wave Motion, 2004, 39: 61-75. |
|
[8]
|
|
|
[9]
|
|
|
[10]
|
David W, Kevin C Baldwin. Laser-based ultrasonics: applications at APL[J]. Johns Hopkins APL Technical Digest, 2005, 26(1): 36-45. |
|
[11]
|
Jung-Ryul Lee, See Yenn Chong. Repeat scanning technology for laser ultrasonic propagation imaging[J]. Meas Sci Technol, 2013, 24: 085201. |
|
[12]
|
|
|
[13]
|
|
|
[14]
|
Chen Ciang Chia. Radome health management based on synthesized impact detection, laser ultrasonic spectral imaging, and wavelet-transformed ultrasonic propagation imaging methods[J]. Composites, 2012, 43: 2898-2906 . |
|
[15]
|
Jung-Ryul Lee, He-Jin Shin. Long distance laser ultrasonic propagation imaging system for damage visualization[J]. Optics and Lasers in Engineering, 2011, 49: 1361-1371. |
|
[16]
|
|
|
[17]
|
|
|
[18]
|
Jung-Ryul Lee, Chen Ciang Chia. Laser ultrasonic propagation imaging method in the frequency domain based on wavelet transformation[J]. Optics and Lasers in Engineering, 2011, 49: 167-175. |
|
[19]
|
Ma Jian, Zhao Yang. Numerical simulation of temperature of material surface irradiated by the laser[J]. Laser Technology, 2013, 37(4): 455-459. |
|
[20]
|
|
|
[21]
|
Coufal H, Grygier R, Hess P. Broad band detection of laser-excited surface acoustic waves by a novel transducer employing ferroelectric polymers[J]. Acoustic Soc Am, 1992, 92(5): 2890-2893. |
|
[22]
|
|
|
[23]
|
Gurley K, Kareem A. Applications of wavelet transforms in earthquake[J]. Wind and Ocean Engineering Structures, 1999, 21(2): 149-167. |
-
-
Proportional views
-
DownLoad: