Xiao Qianjin, Jia Hongguang, Han Xuefeng, Xi Rui. Performance analysis of a kind of moving reflector’s mechanism with small coupling displacement[J]. Infrared and Laser Engineering, 2013, 42(4): 975-981.
| Citation:
|
Xiao Qianjin, Jia Hongguang, Han Xuefeng, Xi Rui. Performance analysis of a kind of moving reflector’s mechanism with small coupling displacement[J]. Infrared and Laser Engineering, 2013, 42(4): 975-981.
|
Performance analysis of a kind of moving reflector’s mechanism with small coupling displacement
- 1.
Changchun Institute of Optics,Fine Mechanics and Physics,Chinese Academy of Sciences,Changchun 130033,China;
- 2.
University of Chinese Academy of Sciences,Beijing 100049,China
- Received Date: 2012-09-05
- Rev Recd Date:
2012-10-09
- Publish Date:
2013-04-25
-
Abstract
A kind of moving reflector's mechanism with small coupling displacement was studied to control the reflector's movement of Michelson interferometer in FTIR spectrometer. On the basis of a single and double parallel four-bars mechanisms, the moving reflector's mechanism was created by employing flexure hinges. And the static and dynamic characteristics of the mechanism system driven by piezoelectric ceramic(PZT) actuator were analyzed. The results reveal that there is no coupling displacement produced with the mechanism when force is symmetrical, while the coupling angle of the mechanism is small to 10-6(in degrees) when force is unsymmetrical, and that the maximum stress of the mechanism is about 0.5 times lower than that of double parallel four-bars mechanism at the same output displacement. Moreover, the natural frequency fn of the electromechanical system composed of PZT actuator and the mechanism is 4 times higher than the fundamental frequency f of the mechanism, which meets the requirement of dynamic performance. The study will provide a basis and some valuable theoretical guidance for future research.
-
References
|
[1]
|
|
|
[2]
|
Gong Haimei, Liu Dafu. Development and trends in spaceborne infrared detectors[J]. Infrared and Laser Engineering, 2008, 37(1): 18-24. (in Chinese) |
|
[3]
|
|
|
[4]
|
Liu Hua, Liu Weiqi, Feng Rui, et al. Noval design and analysis of a flexible mechanism of moving mirror[J]. Infrared and Laser Engineering, 2012, 41(1): 184-189. (in Chinese) |
|
[5]
|
Yu Jingjun, Fei Xu, Bi Shusheng, et al. State-of-arts of design method for flexure mechanisms[J]. Journal of Mechanical Engineering, 2010, 46(13): 2-11. (in Chinese) |
|
[6]
|
|
|
[7]
|
Zhen Gao, Dan Zhang. Flexure parallel mechanism: Configuration and performance improvement of a compact acceleration sensor[J]. Journal of Mechanisms and Robotics, 2012, 4: 031002/1-031002/10. |
|
[8]
|
|
|
[9]
|
Lin Xuesong, Wang Shurong, Li Futian. Design and investigation of the precision scans structure of space infrared FTS[J]. Optics and Precision Engineering, 2005, 13(6): 691-696. (in Chinese) |
|
[10]
|
|
|
[11]
|
|
|
[12]
|
Yang Xuefeng, Li Wei, Wang Yuqiao, et al. Output displacement anslysis of single parallel four-bar mechanism with right angle flexure hinge[J]. Nanotechnology and Precision Engineering, 2009, 7(4): 346-350. (in Chinese) |
|
[13]
|
|
|
[14]
|
Shen Jianying, Yang Shixi, Zhou Qinghua, et al. Finite element analysis of displacement performance of flexure hinge mechanism affected by machine errors[J]. Transaction of the Chinese Society for Agriculture Machinery, 2007, 38(7): 133-136. (in Chinese) |
|
[15]
|
|
|
[16]
|
Paros J M, Weisbord L. How to design flexure hinges[J]. Machine Design, 1989, 37: 151-156. |
|
[17]
|
|
|
[18]
|
Zhou Xiaolin, Cui Changcai, Fan Wei, et al. Computation and analysis of the three models of flexure hinge[J]. Jounal of Mechine Design, 2011, 28(5): 5-9. (in Chinese) |
|
[19]
|
Lobontiu N, Paine J, Garcia E, et al. Corner-filleted flexure hinges[J]. ASME J of Mechanical Design, 2001, 123(3): 346-352. |
-
-
Proportional views
-
DownLoad: