Volume 42 Issue 4
Feb.  2014
Turn off MathJax
Article Contents

Qu Hongfeng, Wang Xiaodong, Xu Shuyan, Bao Haiming, Li Bingyu, Lv Baolin. Anti-jamming design for multi-velocity imaging mode of multiple TDI CCDs mosaic remote camera[J]. Infrared and Laser Engineering, 2013, 42(4): 1026-1032.
Citation: Qu Hongfeng, Wang Xiaodong, Xu Shuyan, Bao Haiming, Li Bingyu, Lv Baolin. Anti-jamming design for multi-velocity imaging mode of multiple TDI CCDs mosaic remote camera[J]. Infrared and Laser Engineering, 2013, 42(4): 1026-1032.

Anti-jamming design for multi-velocity imaging mode of multiple TDI CCDs mosaic remote camera

  • Received Date: 2012-09-05
  • Rev Recd Date: 2012-10-09
  • Publish Date: 2013-04-25
  • TDI CCD imaging circuits had been interfered by each other in multi-velocity working mode. There were jamming inclined strips whose slopes varied with raw frequency on the image of that mode.The original circuit design system was detailedly analyzed and optimized to solve this problem.First, the phase difference in various line cycles had been analyzed. Since there were many differences in every line cycle of various CCD imaging timing, the interference was different between some pixels and other pixels of every line in multi-velocity working mode. The interference difference of some pixels was the reason that causes jamming inclined strips. Then, those problems were solved by these methods, such as the optimized routing of critical signals, adjustment of ground and power layout, and improvement that the decoupling capacitor connected into ground. Finally, imaging circuits were tested after improvement. The results indicated that jamming inclined strips were eliminated. Image RMS noise wasreduced from 21.5 mV to 4.2 mV. The experiment showed that the use of anti-jamming technology effectively reduced the channel interference and improved image quality.
  • [1] Li Jin, Jin Longxu, Han Shuangli, et al. Test system for time-delayed integration charge coupled device of remote camera with wide field of view[J]. Infrared and Laser Engineering, 2012, 41(9): 2415-2423. (in Chinese) 李进, 金龙旭, 韩双丽, 等. 大视场遥感相机的时间延迟积分电荷耦合器件测试系统[J]. 红外与激光工程, 2012, 41(9): 2415-2423.
    [2]
    [3]
    [4] Li Weixiong, Xu Shuyan, Yan Dejie. Influencing parameters of estimate errors of space camera's drift angle[J]. Infrared and Laser Engineering, 2011, 40(8): 1530-1536. (in Chinese) 李伟雄, 徐抒岩, 闫得杰. 影响空间相机偏流角估值误差的参数[J]. 红外与激光工程, 2011, 40(8): 1530-1536.
    [5]
    [6] Ma Tianbo, Guo Yongfei, Li Yunfei. Precision of row frequency of scientific grade TDI CCD camera[J]. Optics and Precision Engineering, 2010, 18(9): 2028-2035. (in Chinese) 马天波, 郭永飞, 李云飞. 科学级TDI CCD相机的行频精度[J].光学精密工程, 2010, 18(9): 2028-2035.
    [7] Janesick J R. Scientific Charge-Coupled Devices[M]. SPIE Press, 2001, 714-715.
    [8]
    [9]
    [10] Wang Xuezhou. Anti-jamming technics of imaging circuit[J]. Spacecraft Recovery Remote Sensing, 2004, 25(1): 26-32. (in Chinese) 王学周. 成像电路抗干扰技术研究[J]. 航天返回与遥感, 2004, 25(1): 26-32.
    [11] Xue Xucheng, Li Hongfa, Guo Yongfei. Anti-crosstalk techniques for high-speed CCD imaging circuit[J]. Chinese Optics, 2011, 4(6): 611-616. (in Chinese) 薛旭成, 李洪法, 郭永飞. 高速CCD成像电路抗串扰技术[J].中国光学, 2011, 4(6): 611-616.
    [12]
    [13] Wang Ying, Li Jin, Liu Changju. Low noise design of multi channel scanning CCD[J]. Semiconductor Optoelectronics, 2009, 30(5): 785-787. (in Chinese) 王颖, 李金, 刘昌举. 多通道扫描CCD 相机的低噪声设计[J]. 半导体光电, 2009, 30(5): 785-787.
    [14]
    [15]
    [16] Wei Dongdong, Wang Dayong, Li Caixia. Design of CCD timing driving circuit[J]. Transducer and Microsystem Technologies, 2011, 30(9): 112-114. (in Chinese) 魏冬冬, 王大勇, 李彩霞. CCD时序驱动电路的设计[J]. 传感器与微系统, 2011, 30(9): 112-114.
    [17] Ma Qingjun, Song Kefei, Qu Yi, et al. Design of CCD circuit systems for ultraviolet limb imaging spectrometers[J]. Optics and Precision Engineering, 2011, 19(9): 1538-1545. (in Chinese) 马庆军, 宋克非, 曲艺, 等. 紫外临边成像光谱仪CCD电路系统的设计[J]. 光学精密工程, 2011, 19(9): 1538-1545.
    [18]
    [19] Yu Zhilou, Du Guangqin. The ground layout design of high speed PCB[J]. Information Technology and Informationization, 2009, 2: 77-79. (in Chinese) 于治楼, 杜光芹. 高速PCB的地线布线设计[J]. 信息技术与信息化, 2009, 2: 77-79.
    [20]
    [21] Zhang Yumin. A line design of preventing the totally resistance interference in PCB[J]. Journal of Beijing Vocational Technical Institute of Industry, 2006, 5(2): 88-92. (in Chinese) 张玉民. PCB中防止共阻抗干扰的地线设计[J]. 北京工业职业技术学院学报, 2006, 5(2): 88-92.
  • 加载中
通讯作者: 陈斌, bchen63@163.com
  • 1. 

    沈阳化工大学材料科学与工程学院 沈阳 110142

  1. 本站搜索
  2. 百度学术搜索
  3. 万方数据库搜索
  4. CNKI搜索

Article Metrics

Article views(319) PDF downloads(251) Cited by()

Related
Proportional views

Anti-jamming design for multi-velocity imaging mode of multiple TDI CCDs mosaic remote camera

  • 1. Changchun Institute of Optics,Fine Mechanics and Physics,Chinese Academy of Sciences,Changchun 130033,China

Abstract: TDI CCD imaging circuits had been interfered by each other in multi-velocity working mode. There were jamming inclined strips whose slopes varied with raw frequency on the image of that mode.The original circuit design system was detailedly analyzed and optimized to solve this problem.First, the phase difference in various line cycles had been analyzed. Since there were many differences in every line cycle of various CCD imaging timing, the interference was different between some pixels and other pixels of every line in multi-velocity working mode. The interference difference of some pixels was the reason that causes jamming inclined strips. Then, those problems were solved by these methods, such as the optimized routing of critical signals, adjustment of ground and power layout, and improvement that the decoupling capacitor connected into ground. Finally, imaging circuits were tested after improvement. The results indicated that jamming inclined strips were eliminated. Image RMS noise wasreduced from 21.5 mV to 4.2 mV. The experiment showed that the use of anti-jamming technology effectively reduced the channel interference and improved image quality.

Reference (21)

Catalog

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return