Identification of equivalent dynamic control error model for two-dimensional mirror

Li Hui; Wu Junhui; Hu Xin; Fan Hongjie; Zhao Hongpeng; Huang Zhenyu

Dynamic control error of precise two-dimensional mirror was the important influencing error factor on simulation precision of the laser guided weapon countermeasure simulation system, the accurate error model was the foundation for precision analysis of the simulation system. At present classical frequency method was adopted to analyze the control error by setting up the transfer function of the servo system, the modeling process was complex and accurate model was not easy to build. Then the paper gave the principle of the identification method, the design approach of input LFM signal, the ranks and parameters of the equivalent control error model which was built by using RWLS method. The proposed model was verified by simulative test by inputting the sine signal according to the performance index of the mirror. The result showed that the estimate output was consistent with the simulation output: the estimate average error and maximum error were 0and 13 respectively, which explained the accuracy of the control error model and provided the support for modeling the dynamical control error of other simulation equipment in the simulation system.

1. State Key Laboratory of Complex Electromagnetic Environment Effects on Electronics and Information System,Luoyang 471003,China;

2. 63892 PLA,Luoyang 471003,China

Received Date: 2012-06-05

Rev Recd Date: 2012-07-03

Publish Date: 2013-02-25

Key words:

Abstract: Dynamic control error of precise two-dimensional mirror was the important influencing error factor on simulation precision of the laser guided weapon countermeasure simulation system, the accurate error model was the foundation for precision analysis of the simulation system. At present classical frequency method was adopted to analyze the control error by setting up the transfer function of the servo system, the modeling process was complex and accurate model was not easy to build. Then the paper gave the principle of the identification method, the design approach of input LFM signal, the ranks and parameters of the equivalent control error model which was built by using RWLS method. The proposed model was verified by simulative test by inputting the sine signal according to the performance index of the mirror. The result showed that the estimate output was consistent with the simulation output: the estimate average error and maximum error were 0and 13 respectively, which explained the accuracy of the control error model and provided the support for modeling the dynamical control error of other simulation equipment in the simulation system.

HTML

Reference (39)

[1]
[2]	Li Hui, Li Zhi, HU Xin, et al. Dynamic simulation and control error analysis of two-dimensional reflector[J]. Infrared and Laser Engineering, 2012, 41(7): 1916-1921. (in Chinese)
[3]	Wang Yunping, Zhao Changming, Li Yan, et al. Hardware-in-the-loop-simulation system for laser angle deception jamming[J]. Infrared and Laser Engineering, 2012, 41(5): 1217-1222. (in Chinese)
[4]	李慧, 李芷, 胡欣, 等. 精密两维转镜的动力学仿真与控制误差分析[J]. 红外与激光工程, 2012, 41(7): 1916-1921.
[5]
[6]	Ding Changming. Accuracy analysis of HIL simulation system via parameter identification[J]. System Engineering and Electronics, 2001, 23(3): 79-81. (in Chinese)
[7]	Zhang Binghua, Zhang Shouhui. Electro-Optical Imaging and Tracking System[M]. Chengdu: Publishing House of Electronics University of Science and Technology, 2002. (in Chinese)
[8]
[9]	王云萍, 赵长明, 李岩, 等. 激光角度欺骗干扰半实物仿真试验系统[J]. 红外与激光工程, 2012, 41(5): 1217-1222.
[10]	Wang Guangxiong, He Lian. Control System Design[M]. Beijing: Mechanical Industry Press, 2010. (in Chinese)
[11]	Fang Chongzhi, Xiao Deyun. Process Identification[M]. Beijing: Tsinghua University Press, 1988. (in Chinese)
[12]
[13]
[14]	Tan Wenbin, Li Xingfei, Xiang Hongbiao, et al. Parameter identification of LuGre model based on analysis of steady state error[J]. Optics and Precision Engineering, 2011, 19(3): 664-672. (in Chinese)
[15]	Chen Hui, Tan Yonghong, Zhou Xingpeng, et al. Identification and control of dynamic modeling for piezoceramic actuator[J]. Optics and Precision Engineering, 2012, 20(1): 88-95. (in Chinese)
[16]	丁长明. 用参数辨识法对半实物仿真系统进行精度分析[J]. 系统工程与电子技术, 2001, 23(3): 79-81.
[17]	Zhao Bin, Zhou Jun, Lu Xiaodong. Modeling of three axis simulator based on xPC target[J]. Journal of System Simulation, 2011, 23(2): 284-289. (in Chinese)
[18]
[19]	Ma Jiaguang. The basic technologies of the acquisition, tracking and pointing system[J]. Opto-Electronic Engineering, 1989, 16(3): 1-42. (in Chinese)
[20]
[21]	张秉华, 张守辉. 光电成像跟踪系统[M]. 成都: 电子科技大学出版社, 2002.
[22]
[23]
[24]	王广雄, 何联. 控制系统设计[M]. 北京: 机械工业出版社, 2010.
[25]
[26]
[27]	方崇智, 萧德云. 过程辨识[M]. 北京: 清华大学出版社, 1988.
[28]
[29]
[30]	谭文斌, 李醒飞, 向红标, 等. 应用稳态误差分析辨识LUGre模型参数[J]. 光学精密工程, 2011, 19(3): 664-672.
[31]
[32]
[33]	陈辉, 谭永红, 周杏鹏, 等. 压电陶瓷执行器的动态模型辨识与控制[J]. 光学精密工程, 2012, 20(1): 88-95.
[34]
[35]
[36]	赵斌, 周军, 卢晓东. 基于xPC的三轴仿真转台模型辨识方法研究[J]. 系统仿真学报, 2011, 23(2): 284-289.
[37]
[38]
[39]	马佳光. 捕获跟踪与瞄准系统的基本技术问题[J]. 光电工程, 1989, 16(3): 1-42.

Identification of equivalent dynamic control error model for two-dimensional mirror

Abstract

References

Proportional views

通讯作者: 陈斌, bchen63@163.com

Article Metrics

Related

Proportional views