Volume 43 Issue 4
May  2014
Turn off MathJax
Article Contents

Zhou Wei, Ouyang Cheng, Wu Jing, Gao Yanqing, Huang Zhiming. Investigation on preparation method and performance of Mn1.56Co0.96-xNi0.48CuxO4 thin film IR detector[J]. Infrared and Laser Engineering, 2014, 43(4): 1073-1079.
Citation: Zhou Wei, Ouyang Cheng, Wu Jing, Gao Yanqing, Huang Zhiming. Investigation on preparation method and performance of Mn1.56Co0.96-xNi0.48CuxO4 thin film IR detector[J]. Infrared and Laser Engineering, 2014, 43(4): 1073-1079.

Investigation on preparation method and performance of Mn1.56Co0.96-xNi0.48CuxO4 thin film IR detector

  • Received Date: 2013-08-15
  • Rev Recd Date: 2013-09-25
  • Publish Date: 2014-04-25
  • The preparation procedure and performance of Mn1.56Co0.96-xNi0.48CuxO4 (MCNC, x=0, 0.08, 0.16, 0.24) IR detectors were reported. By varying the content of Cu ratio, a series of MCNC films and IR detectors were fabricated. The results show that the substitution of Cu element can significantly reduces the resistance and device noise for detectors with specific thickness and size. The typical time constant of the detector is 20-40 ms. The MCNC IR detector with x=0.24 shows a detectivity (D*) of about 0.83107 cmHz1/2W-1, which is enhanced by about 130% in comparing to the x=0.00 one. Additionally, the ageing phenomenon of MCNC detector is discussed in general.
  • [1]
    [2] Zhang L B, Hou Y, Zhou W, et al. Investigation on optical properties of NiMn2O4 films by spectroscopic ellipsometry[J]. Solid State Commun, 2013, 159: 32-35.
    [3] Yokoyama T, Abe Y, Meguro T, et al. Preparation and electrical properties of sintered bodies composed of monophase spinel Mn (2-X)Co2XNi (1-X)O-4 (0 =X =1) derived from rock-salt-type oxides [J]. Japanese Journal of Applied Physics Part 1-Regular Papers Short Notes Review Papers, 1996, 35: 5775-5780.
    [4]
    [5]
    [6] Dannenberg R, Baliga S, Gambino R J, et al. Infrared optical properties of Mn1.56Co0.96Ni0.48O4 spinel films sputter deposited in an oxygen partial pressure series [J]. J Appl Phys, 1999, 86: 2590-2601.
    [7] Hou Y, Huang Z M, Gao Y Q, et al. Characterization of Mn (1.56)Co(0.96)Ni(0.48)O(4) films for infrared detection[J]. Appl Phys Lett, 2008, 92(20): 202115-1-202115-3.
    [8]
    [9] He L, Ling Z Y. Electrical conduction of intrinsic grain and grain boundary in Mn-Co-Ni-O thin film thermistors: Grain size influence [J]. J Appl Phys, 2011, 110 (9): 093708-1-093708-6.
    [10]
    [11]
    [12] Baliga S, Jain A L, Zachofsky W. Sputter deposition and cCharacterization of Ni-Mn-O and Ni-Co-Mn-O Spinels on polymide and glass substrates [J]. Appl Phys a-Mater, 1990, 50: 473-477.
    [13]
    [14] Dannenberg R, Baliga S, Gambino R J, et al. Resistivity, thermopower and the correlation to infrared active vibrations of Mn1.56Co0.96Ni0.48O4 spinel films sputtered in an oxygen partial pressure series[J]. J Appl Phys, 1999, 86(1): 514-523.
    [15]
    [16] Zhou W, Hou Y, Gao Y Q, et al. Experimental study on the responsivity enhancement of Mn1.56Co0.96Ni0.48O4 detector under moderate bias field [C]//International Symposium on Photoelectronic Detection and Imaging, 2011, 8193: 81934G-1-81934G-7.
    [17]
    [18] 张雷博. 锰钴镍仰系薄膜光学性质及多元器件研究[D]. 上 海: 上海技术物理研究, 2013.
    [19]
    [20] Hou Yun, Zhou Wei, Chu Junhao. Spectroscopic and electrial properties of manganese cobalt nickelate copper films prepared by chemical depopition [J]. Infrared Millim Waves, 2013(2): 113-117.
    [21] Lisauskas A, Khartsev S I, Grichin A. Tailoring the colossal magnetoresisitivity: La-07 (Pb0.63Sr0.37) (0.3)MnO3 thin-film uncooled bolometer [J]. Appl Phys Lett, 2000, 77 (5): 756-758.
    [22]
    [23] Metz R. Electrical properties of NTC thermistors made of manganite ceramics of general spinel structure: Mn3-x-x'MxNx'O4 (0 =x plus x'=1; M and N being Ni, Co or Cu). Aging phenomenon study [J]. J Mater Sci, 2000, 35: 4705-4711.
  • 加载中
通讯作者: 陈斌, bchen63@163.com
  • 1. 

    沈阳化工大学材料科学与工程学院 沈阳 110142

  1. 本站搜索
  2. 百度学术搜索
  3. 万方数据库搜索
  4. CNKI搜索

Article Metrics

Article views(376) PDF downloads(164) Cited by()

Related
Proportional views

Investigation on preparation method and performance of Mn1.56Co0.96-xNi0.48CuxO4 thin film IR detector

  • 1. National Laboratory for Infrared Physics,Shanghai Institute of Technical Physics,Chinese Academy of Sciences,Shanghai 200083,China

Abstract: The preparation procedure and performance of Mn1.56Co0.96-xNi0.48CuxO4 (MCNC, x=0, 0.08, 0.16, 0.24) IR detectors were reported. By varying the content of Cu ratio, a series of MCNC films and IR detectors were fabricated. The results show that the substitution of Cu element can significantly reduces the resistance and device noise for detectors with specific thickness and size. The typical time constant of the detector is 20-40 ms. The MCNC IR detector with x=0.24 shows a detectivity (D*) of about 0.83107 cmHz1/2W-1, which is enhanced by about 130% in comparing to the x=0.00 one. Additionally, the ageing phenomenon of MCNC detector is discussed in general.

Reference (23)

Catalog

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return