Microstructure and properties of laser cladding high entropy alloy MoFeCrTiWAlxSiy coating

An Xulong; Liu Qibin; Zheng bo

To obtain high performance coating materials, the HEAs MoFeCrTiWAlxSiy coating was prepared on 45# steel by laser cladding. By means of OM, XRD and micro-hardness tester, the microstructure and properties of the high-entropy alloy layer with adding Al and Si element were investigated. The experimental results indicate that the addition of Si element will promote the formation of intermetallic compound, and Al in the coating exhibits obvious the grain refining. In addition, the hardness of the coating is significantly increased, and reaches a maximum (839.3 HV). Adding Al can inhibit the formation of intermetallic compound and induces the simple BCC phase structure of the coating, but the hardness of the coating decrease. Simultaneous addition of Si and Al, the excellent quality coating with detailed microstructure and relatively high hardness can be obtained.

Microstructure and properties of laser cladding high entropy alloy MoFeCrTiWAl_xSi_y coating

1. College of Materials and Metallurgy,Guizhou University,Guiyang 550025,China;

2. Key Laboratory for Material Structure and Strength of Guizhou Province,Guiyang 550025,China

Received Date: 2013-08-10

Rev Recd Date: 2013-09-25

Publish Date: 2014-04-25

Key words:

Abstract: To obtain high performance coating materials, the HEAs MoFeCrTiWAlxSiy coating was prepared on 45# steel by laser cladding. By means of OM, XRD and micro-hardness tester, the microstructure and properties of the high-entropy alloy layer with adding Al and Si element were investigated. The experimental results indicate that the addition of Si element will promote the formation of intermetallic compound, and Al in the coating exhibits obvious the grain refining. In addition, the hardness of the coating is significantly increased, and reaches a maximum (839.3 HV). Adding Al can inhibit the formation of intermetallic compound and induces the simple BCC phase structure of the coating, but the hardness of the coating decrease. Simultaneous addition of Si and Al, the excellent quality coating with detailed microstructure and relatively high hardness can be obtained.

HTML

Reference (23)

[1]	Yeh Jien-Wei, Chang Shou-yi, Hong Yu-der, et al. Anomalous decrease in X-ray diffraction intensities of Cu-Ni-Al-Co-Cr-Fe-Si alloy systems with muti-principal elements [J]. Materials Chemistry and Physics, 2007, 103: 41-46.
[2]
[3]	Qiu Xingwu, Zhang Yunpeng. The characteristics of high-entropy alloys and their latest development [J]. Rare Metals and Cemented Carbides, 2012, 40(1): 44-47. (in Chinese) 邱星武, 张云鹏. 高熵合金的特点及研究现状[J]. 稀有金属及硬质合金, 2012, 40(1): 44-47.
[4]
[5]	Lin Lirong. The structure and properties of five-element high entropy alloys with high melting temperature [D]. Harbin: Harbin Institue of Technology, 2007: 5-10. (in Chinese) 林丽蓉. 高熔化温度五元高熵合金组织及性能研究[D]. 哈尔滨: 哈尔滨工业大学, 2007: 5-10.
[6]
[7]
[8]	Li Yafeng, Kong Lijun, Gan Zhanghua, et al. Prearation and properties of FeNiMnCuC0.2Alx high-entropy alloy [J]. Journal of Wuhan University of Science and Technology, 2009, 32(1): 60-63. (in Chinese) 李亚峰, 孔利军, 甘章华, 等. FeNiMnCuC0.2Alx 高熵合金结构及性能研究[J]. 武汉科技大学学报, 2009, 32 (1): 60-63.
[9]	Pi Jinhong, Pan Ye, Zhang Hui, et al. Microstructure and properties of AlCrFeCuNix (0.6x1.4) high-entropy alloys[J]. Materials Science and Engineering A, 2011, 534:228-233.
[10]
[11]	Zhang Lidong, Liu Chunhai, Sun Huadong, et al. Crystalline 安旭龙等：激光熔覆制备高熵合金MoFeCrTiWAlxSiy 涂层的组织与性能1143 structure of AlCrTaTiNi high entropy alloys [J]. Journal of Functional Materials, 2012, 3(43): 394-397. (in Chinese) 张立东, 刘春海, 孙化冬, 等. 晶体AlCrTaTiNi 高熵合金薄膜[J]. 功能材料, 2012, 43(3): 394-397.
[12]
[13]
[14]	Wang Zhijian, Dong Shiyun, Xu Binshi, et al. Effect of laser cladding processing parameters on metal forming efficiency and geometry [J]. Infrared and Laser Engineering, 2010, 39(2): 315-319. (in Chinese) 王志坚, 董世运, 徐滨士, 等. 激光熔覆工艺参数对金属成形效率和形状的影响[J]. 红外与激光工程, 2010, 39(2): 315-319.
[15]
[16]	Zhang Hui, Pan Ye, He Yizhu. Laser clodding FeCoNiCrAl2Si high entropy alloy cotting [J]. Acta Metallurgica Sinica, 2011, 47(8): 1075-1079. (in Chinese) 张晖, 潘冶, 何宜柱. 激光熔覆FeCoNiCrAl2Si 高熵合金涂层[J]. 金属学报, 2011, 47(8): 1075-1079.
[17]	He Li, Zhang Yunpeng, Qiu Xingwu. Study on microstructure and corrosion resistance of Al2CrFeNiCoxCuTi high entropy alloy [J]. Rare Metals and Cemented Carbides, 2013, 41 (4): 38-41. (in Chinese) 何力, 张云鹏, 邱星武. Al2CrFeNiCoxCuTi 高熵合金的组织结构及腐蚀性能研究[J]. 稀有金属和硬质合金, 2013, 41 (4): 38-41.
[18]
[19]	Zhou Yunjun, Zhang yong. Microstructure characterization of Alx (TiVCrMnFeCoNiCu)100-x high-entropy alloy system with multi-principal elements[J]. Rare Metals Materials and Engineering, 2007, 36(12): 2136-2139. (in Chinese) 周云军, 张勇. 多组元Alx (TiVCrMnFeCoNiCu)100-x 高熵合金系微观组织研究[J]. 稀有金属材料与工程, 2007, 36 (12) :2136-2139.
[20]
[21]
[22]	Liu Shusai, Huang Weigang. Microstructure and mechanical performance of Al-Co-Cr-Ni-Six high entropy alloys [J]. Journal of materials engineering, 2012(1): 5-8. (in Chinese) 刘恕赛, 黄维刚. AlCoCrNiSix 高熵合金微观组织结构与力学性能[J]. 材料工程, 2012(1): 5-8.
[23]	Niu Xuelian, Wang Lijiu. Research on microstructure and electrochemical properties of AlxFeCoCrNiCu (x=0.25,0.5,1.0) high-entropy alloy [J]. Journal of Functional Materials, 2013, 44(4): 532-535. (in Chinese) 牛雪莲, 王立久. AlxFeCoCrNiCu (x=0.25,0.5,1.0)高熵合金的组织结构和电化学性能研究[J]. 功能材料, 2013, 44(4): 532-535.

Microstructure and properties of laser cladding high entropy alloy MoFeCrTiWAl_xSi_y coating

Abstract

References

Proportional views

通讯作者: 陈斌, bchen63@163.com

Article Metrics

Related

Proportional views