Ma Bingxu, Wen Shangsheng, Chen Yingcong, Liu Lei, Shi Chenyang. Design of edge-lighting LED flat panel light without light guide plate[J]. Infrared and Laser Engineering, 2016, 45(4): 418001-0418001(8). doi: 10.3788/IRLA201645.0418001
| Citation:
|
Ma Bingxu, Wen Shangsheng, Chen Yingcong, Liu Lei, Shi Chenyang. Design of edge-lighting LED flat panel light without light guide plate[J]. Infrared and Laser Engineering, 2016, 45(4): 418001-0418001(8). doi: 10.3788/IRLA201645.0418001
|
Design of edge-lighting LED flat panel light without light guide plate
- 1.
School of Materials Science and Engineering,South China University of Technology,Guangzhou 510640,China;
- 2.
State Key Laboratory of Luminescence Materials and Devices,South China University of Technology,Guangzhou 510640,China
- Received Date: 2015-08-09
- Rev Recd Date:
2015-09-14
- Publish Date:
2016-04-25
-
Abstract
A LED flat panel light without light guide plate was designed to solve the disadvantages of low luminous efficiency and the high cost of Light Guide Plate(LGP) in edge-lighting LED flat panel light. The beam launched from the LED arrays was converged by the compound parabolic reflective cup(CPC) and was gazed on light emitting panel. In this way, the uniform luminous can be obtained on light emitting panel. Then, Taguchi method was used to design the experiment and analyzed the factors that affected maximum and uniformity of illumination by the software of Tracepro simultaneously. Furthermore, the influence of quality was studied by the theory of ANOVA to optimize structural parameters. Finally, the LED flat panel light without light guide plate after optimizing was designed with the illumination uniformity of 95.87% and the maximum illumination of 39 870 lx. These results show that the flat panel light that designed has achieved the general or even better effects of LED flat lights. It can also largely reduce the production cost of LED flat panel lights owing to the design of removing LGP. Besides, the applying of Taguchi method greatly simplified the design processes.
-
References
|
[1]
|
Chen Haowei, Wen Shangsheng, Ma Bingxu, et al. Design of ultra-thin direct-down LED panel with tapered optical elements based on taguchi method[J]. Acta Photonica Sinica, 2015, 44(10):1022003. (in Chinese) |
|
[2]
|
Ma Bingxu, Wen Shangsheng, Chen Yingcong, et al. Edge-lighting natural light flat panel light without light guide plate[J]. Acta Photonica Sinica, 2015, 44(7):0722002. (in Chinese) |
|
[3]
|
Xiao Xiao, Wen Shangsheng, Chen Jianlong, et al. Optical performance of secondary lightguide-diffusive component in direct LED backlight module[J]. Journal of OptelectronicsLaser, 2013, 24(4):679-686. (in Chinese) |
|
[4]
|
Lai Liping, Zhuang Qiren, Liang Dejuan, et al. Investigation of uniform illumination of the near-field on the lateral panels using LED projectors[J]. Acta Optica Sinica, 2014, 34(3):0322002. (in Chinese) |
|
[5]
|
Su Zhouping, Que Lizhi, Zhu Zhuowei, et al. Optical system design of the compact collimator for LED source[J]. Laser Optoelectronics Progress, 2012, 49(2):022203. (in Chinese) |
|
[6]
|
Yu Guiying, Jin Ji, Ni Xiaowu, et al. Design for LED uniform illumination reflector based on tendue[J]. Acta Optica Sinica,2009, 29(8):2297-2301. (in Chinese) |
|
[7]
|
Liu Lingzhi, Li Jihong. The optical performance of compound parabolic concentrators(CPC)[J]. Energy Technology, 2006, 27(2):52-59. (in Chinese) |
|
[8]
|
Wang Le, Zhang Shusheng, Zhai Jing. Modeling of LED reflector cup based on compound parabolic concentrator[J]. Laser Optoelectronics Progress, 2012, 49(2):1-6. (in Chinese) |
|
[9]
|
Wu Fengtie, Huang Qilu. A precise model of LED lighting and its application in uniform illumination system[J].Optoelectronics Letters, 2011, 7(5):334-336. (in Chinese) |
|
[10]
|
Lin C F, Wu C C, Yang P H, et al. Application of Taguchi method in light-emitting diode backlight design for wide color gamut displays[J]. Journal of Display Technology, 2009, 5(8):323-329. |
-
-
Proportional views
-
DownLoad: